AS & A Level Mathematics · Pure Mathematics 1 · Chapter 6
Integration
Integration is differentiation run backwards, and it is also the tool that finds area. In this chapter you will reverse a gradient function to recover a curve, add up thin strips to get areas, and spin regions around an axis to get volumes.
Learning objectives
- Reverse differentiation: find y from dy/dx, and explain why a constant c appears.
- Use a point on the curve to find c and so the particular solution.
- Integrate xⁿ (n ≠ −1), including negative and fractional powers, and integrate term by term.
- Find the area under a curve as a definite integral, and understand area as the limit of a sum.
- Handle areas below the x axis, areas between two curves and areas between a curve and the y axis.
- Integrate (ax + b)ⁿ using the reverse chain rule.
- Evaluate improper integrals using limits.
- Find volumes of revolution about the x axis and the y axis.
Book exercises: 6A, 6B, 6C, 6D, 6E, 6F, 6G and 6H, with Activities 6.1 to 6.4 and the Think about it questions. The book has no separate end-of-chapter review for this chapter, only the Key points.
Reversing differentiation
- Sometimes you know the gradient function dy/dx and want the function y itself.
- Example: dy/dx = 2x. You know that y = x² has gradient 2x.
- But y = x² + 1 and y = x² − 2 also have gradient 2x. Every curve in the family has the same slope at a given x.
- So the answer is not one curve but a whole family of curves, each shifted up or down.
🔑 Why only a constant can differ
- Suppose f(x) is any function with f′(x) = 2x.
- Let g(x) = f(x) − x². Then g′(x) = 2x − 2x = 0 for all x.
- A graph with zero gradient everywhere is a horizontal line, so g(x) = c, a constant.
- Therefore f(x) = x² + c. Every solution has this form.
🔑 Key words
- Differential equation: an equation containing dy/dx, such as dy/dx = 2x.
- Integration: the process of solving it to find y.
- General solution: y = x² + c, with an arbitrary constant c that can take any value. It is a family of curves.
- Particular solution: one curve picked out by extra information, such as a point it passes through.
🎛️ Simulation: pick the curve that goes through your point
- The gradient is dy/dx = 2x. Move the point (x₀, y₀) and watch the particular solution change.
- The pale curves are the general family y = x² + c. The bold curve is the one through your point.
The rule for integrating xⁿ
| Integrate | Rewrite as a power | Result |
|---|---|---|
| ∫x³ dx | x³ | x⁴/4 + c |
| ∫1 dx | x⁰ (differentiating x gives 1) | x + c |
| ∫5 dx | 5x⁰ | 5x + c |
| ∫x⁻² dx | x⁻² (it is 1/x²) | x⁻¹/(−1) = −1/x + c |
| ∫√x dx | x1/2 | x3/2/(3/2) = (2/3)x3/2 + c |
| ∫1/√x dx | x−1/2 | x1/2/(1/2) = 2√x + c |
- The rule holds for every real n except −1 (for n = −1 you would divide by zero).
- Integrate term by term, and constant multiples just come along: ∫3x² dx = 3 · x³/3 = x³ + c.
- Rewrite roots and fractions as powers first: 1/x² = x⁻², √x = x1/2.
- Dividing by a fraction means multiplying by its reciprocal: dividing by 3/2 is multiplying by 2/3.
- One constant c is enough for a whole sum of terms.
Finding the particular solution
📘 Example 6.1 · dy/dx = 3x² + 4x + 3
(i) Find the general solution. (ii) Find the curve through (1, 10).
- Integrate term by term: 3x² → x³, 4x → 2x², 3 → 3x.
- General solution: y = x³ + 2x² + 3x + c.
- Substitute (1, 10): 10 = 1³ + 2(1)² + 3(1) + c = 6 + c.
- So c = 4.
- Particular solution: y = x³ + 2x² + 3x + 4.
- Check: at x = 1, y = 1 + 2 + 3 + 4 = 10. ✔
📘 Example 6.2 · dy/dx = 3√x + 8/x², curve through (4, 20)
- Rewrite with powers: dy/dx = 3x1/2 + 8x⁻².
- Integrate 3x1/2: 3 · x3/2/(3/2) = 3 · (2/3)x3/2 = 2x3/2.
- Integrate 8x⁻²: 8 · x⁻¹/(−1) = −8x⁻¹ = −8/x.
- General: y = 2x3/2 − 8/x + c.
- Substitute (4, 20): 43/2 = (√4)³ = 8, so 20 = 2(8) − 8/4 + c = 16 − 2 + c.
- So c = 6, and y = 2x3/2 − 8/x + 6.
📘 Example 6.3 · gradient 4x − 12, minimum y value 16
- At the minimum the gradient is zero: 4x − 12 = 0, so x = 3.
- Integrate: y = 2x² − 12x + c.
- The minimum point is (3, 16): 16 = 2(9) − 12(3) + c = −18 + c.
- So c = 34, and y = 2x² − 12x + 34.
- Check: at x = 3, y = 18 − 36 + 34 = 16. ✔
📘 Example A · dy/dx = 12x² − 6x, curve through (1, 4)
- Integrate: 12x² → 4x³ and −6x → −3x², so y = 4x³ − 3x² + c.
- Substitute (1, 4): 4 = 4 − 3 + c, so c = 3.
- y = 4x³ − 3x² + 3.
- Check the gradient: d/dx(4x³ − 3x² + 3) = 12x² − 6x. ✔
✏️ Try it
- Find ∫(8x³ − 3x² + 5) dx.
- A curve has dy/dx = 3x² − 2 and passes through (2, 7). Find its equation.
- Find ∫(x3/2 − 4/x³) dx.
Answers
1. Step 1: 8x³ → 2x⁴, −3x² → −x³, 5 → 5x. Step 2: 2x⁴ − x³ + 5x + c.
2. Step 1: y = x³ − 2x + c. Step 2: 7 = 8 − 4 + c, so c = 3. Step 3: y = x³ − 2x + 3.
3. Step 1: x3/2 → (2/5)x5/2. Step 2: −4x⁻³ → −4x⁻²/(−2) = 2x⁻². Step 3: (2/5)x5/2 + 2/x² + c.
Finding the area under a curve
- Let A be the area under y = f(x) from a fixed left edge up to a moving right edge at x.
- As the right edge moves, A changes. So A depends on x.
- Add a thin strip of width δx. Its area is δA.
- The strip lies between two rectangles: one of height y, one of height y + δy.
🔑 The fundamental theorem of calculus
- The strip lies between the two rectangles: yδx ≤ δA ≤ (y + δy)δx.
- Divide by δx: y ≤ δA/δx ≤ y + δy.
- Let δx → 0. Then δy → 0 too, so δA/δx is squeezed between y and something that tends to y.
- Therefore dA/dx = y: the rate of change of the area equals the height of the moving boundary.
- So to find A, integrate y. This is why integration finds area.
📘 Example 6.4 · Area under y = 6x⁵ + 6 from x = −1 to x = 2
- Let A be the area up to the moving line. Then dA/dx = y = 6x⁵ + 6.
- Integrate: A = x⁶ + 6x + c.
- When x = −1 the moving line is the left edge, so A = 0: 0 = 1 − 6 + c, giving c = 5.
- So A = x⁶ + 6x + 5.
- Put in the right edge x = 2: A = 64 + 12 + 5 = 81 square units.
The standard procedure
- For the area under y = f(x) from x = a to x = b, integrate f(x) to get F(x).
- A = F(x) + c, and A = 0 when x = a, so c = −F(a).
- The area at x = b is F(b) − F(a). We write this as [F(x)]ba.
- The constant c always cancels, so you never need it for a definite integral.
📘 Example 6.5 · Area under y = 20 − 3x² between x = 1 and x = 2
- f(x) = 20 − 3x², so F(x) = 20x − x³.
- Area = [20x − x³]21 = F(2) − F(1).
- F(2) = 40 − 8 = 32 and F(1) = 20 − 1 = 19.
- Area = 32 − 19 = 13 square units.
Area as the limit of a sum
- Another way to see area: cut the region into thin rectangles and add them up.
- Estimate the area under y = x² + 1 from x = 1 to x = 5 with four rectangles of width 1.
- Left-hand heights give an underestimate; right-hand heights give an overestimate, because the curve is rising.
| Rectangles | Lower estimate | Upper estimate |
|---|---|---|
| 4 | 34 | 58 |
| 8 | 39.5 | 51.5 |
| 16 | 42.375 | 48.375 |
| more and more | both close in on the same number: 45⅓ | |
🎛️ Simulation: rectangles closing in on the exact area
- Pick a curve and drag n. The dark bars are the lower sum, the light bars the upper sum.
- All three curves are rising, so the left-hand heights are lower and the right-hand heights are upper.
From a sum to an integral
- With n rectangles of width δx, n δx equals the width of the region. Here n δx = 5 − 1 = 4.
- A typical strip has area δAᵢ ≈ yᵢ δx, so A ≈ y₁δx + y₂δx + … + yₙδx = Σ yᵢ δx.
- Let n → ∞ and δx → 0: the approximation becomes exact and we write A = ∫y dx.
| Sum (n strips) | Integral (limit) |
|---|---|
| ≈ (approximately equal) | = (exactly equal) |
| δx (small width) | dx |
| Σ (sum), i = 1 to n | ∫ (an Old English S for sum) |
| strips counted 1 to n | x runs from the lower limit to the upper limit |
📘 Example B · The exact area under y = x² + 1 from x = 1 to x = 5
- Write A = ∫51 (x² + 1) dx.
- Integrate: [x³/3 + x]51.
- At the upper limit: 125/3 + 5 = 140/3.
- At the lower limit: 1/3 + 1 = 4/3.
- Subtract: 140/3 − 4/3 = 136/3 = 45⅓ square units.
- Check: 34 ≤ 45⅓ ≤ 58, as the rectangles said. ✔
📘 Activity 6.2 · The trapezium check for y = x + 3
- The area under y = x + 3 from x = 0 to x = b is a trapezium: ½ b (3 + (b + 3)) = ½ b (b + 6) = b²/2 + 3b.
- The area from x = 0 to x = a is likewise a²/2 + 3a.
- The area between x = a and x = b is the difference: (b²/2 + 3b) − (a²/2 + 3a) = [x²/2 + 3x]ba.
- By integration: ∫ba (x + 3) dx = [x²/2 + 3x]ba, the same answer. ✔
✏️ Try it
- Find the area under y = 3x² from x = 1 to x = 4.
- Find the area under y = 1/x² from x = 1 to x = 2.
- Find the area under y = √x from x = 0 to x = 9.
Answers
1. Step 1: ∫41 3x² dx = [x³]41. Step 2: 64 − 1 = 63 square units.
2. Step 1: ∫ x⁻² dx = −x⁻¹ = −1/x. Step 2: [−1/x]21 = (−1/2) − (−1) = 1/2.
3. Step 1: ∫ x1/2 dx = (2/3)x3/2. Step 2: (2/3)(27) − 0 = 18 square units.
Definite and indefinite integrals
| Definite integral | Indefinite integral | |
|---|---|---|
| Looks like | ∫2−1 (4x³ + 4) dx | ∫(2x³ − 3x + 4) dx |
| Has limits? | Yes: an upper and a lower limit | No |
| Answer is | a number (an area, when the curve is above the axis) | a function plus + c |
| Method | [F(x)]ba = F(b) − F(a) | F(x) + c |
- Read ∫2x dx as “the integral of 2x with respect to x”. So ∫2x dx = x² + c.
- In the bracket notation the limits sit to the right of the closing bracket.
- Evaluate by substituting the upper limit first, then subtracting the value at the lower limit.
- Fractions and negative powers: keep brackets round negative numbers so signs stay right.
📘 Example 6.6 · Area under y = 4x³ + 4 from x = −1 to x = 2
- Write A = ∫2−1 (4x³ + 4) dx.
- Integrate: [x⁴ + 4x]2−1.
- Upper limit x = 2: 2⁴ + 4(2) = 16 + 8 = 24.
- Lower limit x = −1: (−1)⁴ + 4(−1) = 1 − 4 = −3.
- Subtract: 24 − (−3) = 27 square units.
📘 Example 6.7 · Evaluate ∫94 x3/2 dx
- Add 1 to the power: 3/2 + 1 = 5/2. Divide by 5/2, that is multiply by 2/5.
- [(2/5)x5/2]94.
- 95/2 = (√9)⁵ = 3⁵ = 243 and 45/2 = (√4)⁵ = 2⁵ = 32.
- (2/5)(243) − (2/5)(32) = (2/5)(243 − 32) = (2/5)(211).
- = 422/5 = 84⅖.
📘 Example 6.8 · Evaluate ∫21 (3/x⁴ − 1/x² + 4) dx
- Rewrite with powers: 3x⁻⁴ − x⁻² + 4.
- Integrate: 3x⁻³/(−3) − x⁻¹/(−1) + 4x = −1/x³ + 1/x + 4x.
- Upper limit x = 2: −1/8 + 1/2 + 8 = 8⅜.
- Lower limit x = 1: −1 + 1 + 4 = 4.
- Subtract: 8⅜ − 4 = 4⅜.
📘 Example 6.9 and 6.10 · Indefinite integrals
- ∫(2x³ − 3x + 4) dx: integrate each term: 2x⁴/4, −3x²/2 and 4x.
- = x⁴/2 − 3x²/2 + 4x + c.
- ∫(x3/2 + √x) dx = ∫(x3/2 + x1/2) dx.
- 3/2 + 1 = 5/2 and 1/2 + 1 = 3/2, so = (2/5)x5/2 + (2/3)x3/2 + c.
Swapping the limits
- From Example 6.6: ∫2−1 (4x³ + 4) dx = 27, so ∫−12 (4x³ + 4) dx = −27.
- If the two limits are equal, the integral is 0 (there is no width).
🧪 Tool: definite integral calculator
- Type a sum of terms like
3x2 - 4x + 5orx1/2 + 2x−3. Use only x, numbers and powers. - Powers can be whole numbers, negatives or fractions such as
x3/2, but not x−1.
Areas below the x axis
- Below the axis y is negative, so y δx is negative.
- An integral that comes out negative tells you the region is below the x axis.
- An area is never negative. Take the positive value for a region below the axis.
📘 Example 6.11 · Region between y = 2/x² − 3, x = 2, x = 4 and the x axis
- Integral: ∫42 (2x⁻² − 3) dx = [−2/x − 3x]42.
- Upper limit: −2/4 − 12 = −12.5.
- Lower limit: −2/2 − 6 = −7.
- Subtract: −12.5 − (−7) = −5.5.
- The integral is negative, so the region is below the axis. Area = 5.5 square units.
When the curve crosses the axis
- A single integral would let the positive and negative parts cancel. That gives a wrong area.
- You must split the region at each place the curve crosses the axis.
📘 Example 6.12 · Area between y = x² + 3x and the x axis from x = −1 to x = 2
- Sketch: x² + 3x = x(x + 3) = 0 at x = 0 and x = −3. So on −1 ≤ x ≤ 0 the curve is below the axis and on 0 ≤ x ≤ 2 it is above.
- Region A (below): ∫0−1 (x² + 3x) dx = [x³/3 + 3x²/2]0−1 = 0 − (−1/3 + 3/2) = −7/6.
- So area A = 7/6.
- Region B (above): ∫20 (x² + 3x) dx = [x³/3 + 3x²/2]20 = 8/3 + 6 = 26/3.
- Total area = 7/6 + 26/3 = 7/6 + 52/6 = 59/6 = 9 5/6 square units.
- Warning: the single integral ∫2−1 (x² + 3x) dx = −7/6 + 26/3 = 15/2 is not the area.
📘 Example C · Area between y = x² − 2x and the x axis from x = 0 to x = 3
- y = x(x − 2) = 0 at x = 0 and x = 2, so split at x = 2.
- From 0 to 2: [x³/3 − x²]20 = 8/3 − 4 = −4/3. Below the axis, area 4/3.
- From 2 to 3: [x³/3 − x²]32 = (9 − 9) − (8/3 − 4) = 4/3. Above the axis, area 4/3.
- Total area = 4/3 + 4/3 = 8/3 square units.
- Check: the single integral from 0 to 3 gives −4/3 + 4/3 = 0, which is useless as an area.
✏️ Try it
- Evaluate ∫31 (x² − 2x) dx.
- Find the area between y = x² − 4 and the x axis from x = 0 to x = 3.
- Evaluate ∫41 (3√x − 2/x²) dx.
Answers
1. Step 1: [x³/3 − x²]31. Step 2: (9 − 9) − (1/3 − 1) = 0 + 2/3 = 2/3.
2. Step 1: y = 0 at x = 2, so split at 2. Step 2: ∫20 = 8/3 − 8 = −16/3, area 16/3. Step 3: ∫32 = (9 − 12) − (8/3 − 8) = 7/3. Step 4: total = 16/3 + 7/3 = 23/3.
3. Step 1: antiderivative 2x3/2 + 2/x. Step 2: upper: 16 + 1/2 = 16.5. Step 3: lower: 2 + 2 = 4. Step 4: 16.5 − 4 = 25/2.
The area between two curves
- Slice the region into thin vertical strips of width δx.
- The height of each strip is the height of the top curve minus the height of the bottom curve.
- So the area is ∫ba (top − bottom) dx, where a and b are the x values of the two ends of the region.
- Those ends are usually where the two curves meet, so find the intersections first.
📘 Example 6.13 · Area enclosed by y = x + 1 and y = x² − 2x + 1
- Where they meet: x² − 2x + 1 = x + 1, so x² − 3x = 0, so x(x − 3) = 0.
- x = 0 or x = 3, giving the points (0, 1) and (3, 4).
- Between them, test x = 1: the line gives 2 and the parabola gives 0, so the line is on top.
- Strip height: (x + 1) − (x² − 2x + 1) = 3x − x².
- Area = ∫30 (3x − x²) dx = [3x²/2 − x³/3]30.
- Upper limit: 27/2 − 9 = 9/2. Lower limit: 0.
- Area = 9/2 square units.
🔑 The book's two methods give the same answer
| Method 1: B − C | Method 2: one integral | |
|---|---|---|
| Idea | Area under the top curve minus area under the bottom curve | Integrate (top − bottom) directly |
| Working | ∫30 (x + 1) dx − ∫30 (x² − 2x + 1) dx = 15/2 − 3 | ∫30 (3x − x²) dx |
| Answer | 9/2 | 9/2 |
- Method 2 is shorter. It also works when part of the region is below the x axis, because top − bottom is still the strip height.
🎛️ Simulation: sweep a strip across the region between two curves
- Choose a pair of curves. Drag the slider to move the vertical strip.
- The shaded part is the area swept so far. At the right-hand end it equals the exact answer.
📘 Example D · Area enclosed by y = x(4 − x) and y = 3
- Meet where 4x − x² = 3, so x² − 4x + 3 = 0, so (x − 1)(x − 3) = 0. Limits x = 1 and x = 3.
- The parabola peaks at (2, 4), above y = 3, so top = 4x − x² and bottom = 3.
- Strip height: 4x − x² − 3.
- Area = ∫31 (4x − x² − 3) dx = [2x² − x³/3 − 3x]31.
- Upper limit: 18 − 9 − 9 = 0. Lower limit: 2 − 1/3 − 3 = −4/3.
- Subtract: 0 − (−4/3) = 4/3 square units.
The area between a curve and the y axis
- Now slice the region into horizontal strips of thickness δy and length x.
- Each strip has area x δy, so A = ∫dc x dy, where c and d are y values.
- The integral is with respect to y, so write x in terms of y first.
| Area under a curve | Area against the y axis | |
|---|---|---|
| Strips are | vertical, width δx | horizontal, thickness δy |
| Strip size | y δx | x δy |
| Integral | ∫y dx | ∫x dy |
| Limits are | x values | y values |
| First step | y is already in terms of x | rearrange to x = … |
📘 Example 6.14 · Area between y = x − 1 and the y axis, from y = 0 to y = 4
- Make x the subject: y = x − 1, so x = y + 1.
- Area = ∫40 x dy = ∫40 (y + 1) dy.
- Integrate: [y²/2 + y]40.
- Upper limit: 8 + 4 = 12. Lower limit: 0.
- Area = 12 square units.
- Check: it is a trapezium with parallel sides 1 and 5 and width 4: ½(1 + 5)(4) = 12. ✔
📘 Example 6.15 · Area between y = √x and the y axis, from y = 0 to y = 3
- Square both sides: y = √x gives x = y².
- Area = ∫30 y² dy = [y³/3]30.
- = 27/3 − 0 = 9 square units.
📘 Example E · Area between y = x³, the y axis, y = 1 and y = 8
- Make x the subject: x = y1/3.
- Area = ∫81 y1/3 dy.
- Integrate: y4/3/(4/3) = (3/4)y4/3. So [(3/4)y4/3]81.
- 84/3 = (∛8)⁴ = 2⁴ = 16 and 14/3 = 1.
- (3/4)(16) − (3/4)(1) = 12 − 3/4 = 45/4 square units.
✏️ Try it
- Find the area enclosed by y = x² and y = 2x.
- Find the area between y = x² (x ≥ 0), the y axis, y = 1 and y = 4.
- Find the area enclosed by y = x² and y = 6 − x.
Answers
1. Step 1: x² = 2x gives x = 0 and x = 2. Step 2: top is 2x. Step 3: ∫20 (2x − x²) dx = [x² − x³/3]20. Step 4: 4 − 8/3 = 4/3.
2. Step 1: x = √y = y1/2. Step 2: ∫41 y1/2 dy = [(2/3)y3/2]41. Step 3: (2/3)(8) − (2/3)(1) = 14/3.
3. Step 1: x² = 6 − x gives x² + x − 6 = 0, so x = −3 and x = 2. Step 2: top is 6 − x. Step 3: ∫2−3 (6 − x − x²) dx = [6x − x²/2 − x³/3]2−3. Step 4: upper: 12 − 2 − 8/3 = 22/3. Lower: −18 − 9/2 + 9 = −27/2. Step 5: 22/3 + 27/2 = 44/6 + 81/6 = 125/6.
The reverse chain rule
- Differentiating a bracket: (derivative of the bracket) × (derivative of the inside).
- Example: d/dx (3x + 2)⁵ = 5 × 3 × (3x + 2)⁴ = 15(3x + 2)⁴.
- Reverse it: ∫15(3x + 2)⁴ dx = (3x + 2)⁵ + c.
- Divide both sides by 15: ∫(3x + 2)⁴ dx = (3x + 2)⁵ + c.
🔑 The rule for a linear bracket
- d/dx (ax + b)ⁿ⁺¹ = a(n + 1)(ax + b)ⁿ
- So ∫(ax + b)ⁿ dx = + c, for n ≠ −1.
- It only works when the inside is linear (ax + b). It does not work for (x² + 1)ⁿ.
Activity 6.3 worked through
| Differentiate | Result | So integrate | Result |
|---|---|---|---|
| (x − 2)⁴ | 4(x − 2)³ | ∫4(x − 2)³ dx; ∫(x − 2)³ dx | (x − 2)⁴ + c; ¼(x − 2)⁴ + c |
| (2x + 5)⁷ | 14(2x + 5)⁶ | ∫7(2x + 5)⁶ dx; ∫28(2x + 5)⁶ dx | ½(2x + 5)⁷ + c; 2(2x + 5)⁷ + c |
| 1/(2x − 1)³ = (2x − 1)⁻³ | −6(2x − 1)⁻⁴ | ∫6(2x − 1)⁻⁴ dx; ∫1/(2x − 1)⁴ dx | −(2x − 1)⁻³ + c; −(2x − 1)⁻³/6 + c |
| √(1 − 8x) | −4(1 − 8x)−1/2 | ∫−4/√(1 − 8x) dx; ∫8/√(1 − 8x) dx | √(1 − 8x) + c; −2√(1 − 8x) + c |
📘 Example 6.16 · Find ∫3/√(5 − 2x) dx
- Write as a power: 3(5 − 2x)−1/2.
- Here a = −2 (the coefficient of x) and n = −1/2.
- Raise the power: n + 1 = 1/2, so (5 − 2x)1/2.
- Divide by (new power) × a = (1/2)(−2) = −1.
- So ∫(5 − 2x)−1/2 dx = −(5 − 2x)1/2, and multiplying by 3 gives −3√(5 − 2x) + c.
- Check: d/dx[−3(5 − 2x)1/2] = −3 · ½ · (−2)(5 − 2x)−1/2 = 3(5 − 2x)−1/2. ✔
📘 Example F · Evaluate ∫20 (2x + 1)³ dx
- a = 2 and n = 3, so the antiderivative is (2x + 1)⁴ / (2 × 4) = (2x + 1)⁴ / 8.
- Upper limit x = 2: 5⁴/8 = 625/8.
- Lower limit x = 0: 1⁴/8 = 1/8.
- Subtract: 625/8 − 1/8 = 624/8 = 78.
📘 Example G · Evaluate ∫73 √(2x − 5) dx
- Write (2x − 5)1/2. Here a = 2 and n = 1/2, so the new power is 3/2.
- Divide by (3/2)(2) = 3: antiderivative (2x − 5)3/2 / 3.
- Upper limit x = 7: 93/2/3 = 27/3 = 9.
- Lower limit x = 3: 13/2/3 = 1/3.
- Subtract: 9 − 1/3 = 26/3.
Using a graph to predict an integral
- y = (x − 2)³ is the graph of y = x³ moved 2 to the right.
- It is below the axis for x < 2 and above for x > 2, in perfectly matching shapes about the point (2, 0).
- So ∫42 (x − 2)³ dx = 4 and ∫20 (x − 2)³ dx = −4: the positive and negative parts cancel.
| Mistake | Why it is wrong | Do this |
|---|---|---|
| ∫(3x + 2)⁴ dx = (3x + 2)⁵/5 | forgot to divide by the 3 | divide by 5 × 3 = 15 |
| ∫(x² + 1)³ dx = (x² + 1)⁴/4 | the inside is not linear | expand the bracket first |
| ∫(5 − 2x)³ dx = (5 − 2x)⁴/4 | ignored a = −2 | divide by 4 × (−2) = −8 |
✏️ Try it
- Find ∫(3x + 1)⁵ dx.
- Find ∫1/(2x − 1)³ dx.
- Evaluate ∫20 √(2x + 1) dx.
Answers
1. Step 1: a = 3 and n = 5, so the new power is 6. Step 2: divide by 6 × 3 = 18. Step 3: (3x + 1)⁶/18 + c.
2. Step 1: write (2x − 1)⁻³; a = 2, new power −2. Step 2: divide by (−2)(2) = −4. Step 3: −1/(4(2x − 1)²) + c.
3. Step 1: (2x + 1)1/2; new power 3/2; divide by (3/2)(2) = 3. Step 2: antiderivative (2x + 1)3/2/3. Step 3: upper 53/2/3 = 5√5/3, lower 1/3. Step 4: (5√5 − 1)/3.
Improper integrals
- An improper integral is one that cannot be evaluated directly. There are two kinds.
- Type 1: a limit is ∞ (or −∞), such as ∫∞1 1/x² dx. Infinity is not a number you can substitute.
- Type 2: the integrand is undefined at an end of the range, such as 1/√x at x = 0.
- In both cases the plan is the same: replace the bad limit by a letter, integrate, then take a limit.
Type 1: an infinite limit (Activity 6.4)
- ∫b1 1/x² dx = [−1/x]b1 = (−1/b) − (−1) = 1 − 1/b.
| b | 2 | 3 | 10 | 100 | 10 000 |
|---|---|---|---|---|---|
| 1 − 1/b | 0.5 | 0.667 | 0.9 | 0.99 | 0.9999 |
- As b → ∞, 1/b → 0, so the value tends to 1: ∫∞1 1/x² dx = 1.
- The region is infinitely long yet its area is finite.
💭 Think about it (the book's questions)
- ∫∞a 1/x² dx: the same working gives 1/a − 1/b → 1/a as b → ∞. So the value is 1/a (for a > 0).
- ∫∞0 1/x² dx: now 1/a gets bigger and bigger as a → 0. So this integral has no finite value.
Type 2: the function is undefined at an end
📘 Example 6.17 · Evaluate ∫90 1/√x dx
- 1/√x is not defined at x = 0, so integrate from a to 9 and let a → 0 from above.
- Write 1/√x = x−1/2. Integrate: x1/2/(1/2) = 2x1/2.
- ∫9a x−1/2 dx = [2x1/2]9a = 2(3) − 2a1/2 = 6 − 2√a.
- As a → 0, 2√a → 0, so the integral tends to 6.
- ∫90 1/√x dx = 6.
- Even though the curve is infinitely high at the left, the area is finite.
| a | 1 | 0.01 | 0.0001 | → 0 |
|---|---|---|---|---|
| 6 − 2√a | 4 | 5.8 | 5.98 | 6 |
🎛️ Simulation: watch the limit settle
- Slide k to push the awkward limit further out (or closer to zero): b = 10ᵏ, or a = 10⁻ᵏ.
- The area approaches its limit but never needs the impossible substitution of ∞ or 0.
📘 Example H · Evaluate ∫∞1 x−3/2 dx
- Replace ∞ by b: ∫b1 x−3/2 dx.
- Integrate: x−1/2/(−1/2) = −2x−1/2 = −2/√x.
- [−2/√x]b1 = (−2/√b) − (−2) = 2 − 2/√b.
- As b → ∞, 2/√b → 0.
- The integral = 2.
⚠️ Not every improper integral has a value
- ∫b1 1/√x dx = [2√x]b1 = 2√b − 2, and 2√b grows without bound as b → ∞.
- So ∫∞1 1/√x dx has no finite value (the area is infinite). Only some tails are thin enough to add up.
✏️ Try it
- Evaluate ∫∞1 1/x⁴ dx.
- Evaluate ∫40 1/√x dx.
- Evaluate ∫−1−∞ 1/x² dx.
Answers
1. Step 1: ∫b1 x⁻⁴ dx = [−1/(3x³)]b1 = −1/(3b³) + 1/3. Step 2: as b → ∞ the first term → 0. Step 3: 1/3.
2. Step 1: [2√x]4a = 4 − 2√a. Step 2: as a → 0 this tends to 4.
3. Step 1: replace −∞ by −b: [−1/x]−1−b = 1 − 1/b. Step 2: as b → ∞, 1/b → 0. Step 3: 1.
Finding volumes by integration
- Rotate a flat region through 360° about an axis and you get a solid of revolution.
- Some are easy (a cone is a rotated triangle), but a curved edge needs integration.
Think about it: describe the solid
- Everyday solids of revolution: bottle, vase, cup, bowl, lampshade, plate, ring, pot, cone-shaped party hat.
A first example: the frustum from y = x
- By cones: big cone (r = 2, h = 2) minus small cone (r = 1, h = 1): (1/3)π(4)(2) − (1/3)π(1)(1) = 8π/3 − π/3 = 7π/3.
- We will get the same answer by integration below. Integration also works when the line becomes a curve.
Rotating about the x axis
- Slice the solid into thin discs, each like a coin.
- A disc at x has radius y and thickness δx, so its volume is about δV = πy² δx.
- Add the discs and let δx → 0: the sum Σ πy² δx becomes an integral.
🔑 Formula: rotation about the x axis
- V = ∫ba π y² dx, where a and b are x values.
- You must write y in terms of x. Then square it: if y = x², then y² = x⁴.
- Leave π in the answer unless a decimal is asked for. It is then exact.
📘 Example 6.18 · Rotate the region under y = x² between x = 1 and x = 3 about the x axis
- y² = (x²)² = x⁴.
- V = ∫31 π x⁴ dx = π [x⁵/5]31.
- Upper limit: 243/5. Lower limit: 1/5.
- V = π(243/5 − 1/5) = 242π/5 cubic units.
- As a decimal, 242π/5 ≈ 152 cubic units (3 s.f.).
📘 Example I · Back to the frustum: y = x from x = 1 to x = 2
- y² = x².
- V = ∫21 π x² dx = π [x³/3]21.
- = π(8/3 − 1/3) = 7π/3, matching the two-cone answer. ✔
📘 Example J · Region under y = 1/x between x = 1 and x = 3 about the x axis
- y² = 1/x² = x⁻².
- V = π ∫31 x⁻² dx = π [−1/x]31.
- Upper limit: −1/3. Lower limit: −1.
- V = π(−1/3 + 1) = 2π/3.
📘 Example K · The volume of a sphere of radius r
- Rotate the semicircle y = √(r² − x²), from x = −r to x = r, about the x axis.
- y² = r² − x².
- V = π ∫r−r (r² − x²) dx = π [r²x − x³/3]r−r.
- Upper: r³ − r³/3 = 2r³/3. Lower: −2r³/3.
- V = π(2r³/3 + 2r³/3) = 4πr³/3, the familiar sphere formula. ✔
🎛️ Simulation: build the solid from discs
- Pick a region and add more and more discs. Each disc has volume π y² δx, with y measured at its middle.
- The sum of the discs closes in on the exact volume from the integral.
Rotating about the y axis
- Now the discs are stacked up the y axis, each of thickness δy.
- A disc at height y has radius x, so δV = πx² δy.
- V = ∫qp π x² dy, where p and q are y values.
- This time write x² in terms of y.
- Proof of the idea (the book asks): slice the solid into thin horizontal discs of radius x and thickness δy; add their volumes πx²δy; let δy → 0. It is exactly the x axis argument with the roles of x and y swapped.
📘 Example 6.19 · Rotate the region between y = x², the y axis, y = 2 and y = 5 about the y axis
- y = x², so x² = y.
- V = ∫52 π x² dy = π ∫52 y dy.
- = π [y²/2]52.
- Upper limit: 25/2. Lower limit: 4/2 = 2.
- V = π(25/2 − 2) = 21π/2 cubic units.
| About the x axis | About the y axis | |
|---|---|---|
| Disc radius | y | x |
| Thickness | δx | δy |
| Formula | V = ∫ π y² dx | V = ∫ π x² dy |
| Limits | x values (a to b) | y values (p to q) |
| Rewrite | y² in terms of x | x² in terms of y |
✏️ Try it
- Rotate the region under y = 2x from x = 0 to x = 3 about the x axis. Find the volume.
- Rotate the region between y = x², the y axis, y = 0 and y = 9 about the y axis. Find the volume.
- Rotate the region under y = x² from x = 0 to x = 2 about the x axis. Find the volume.
Answers
1. Step 1: y² = 4x². Step 2: V = π∫30 4x² dx = π[4x³/3]30. Step 3: π(36 − 0) = 36π (a cone: (1/3)π(6²)(3) = 36π ✔).
2. Step 1: x² = y. Step 2: V = π∫90 y dy = π[y²/2]90. Step 3: 81π/2.
3. Step 1: y² = x⁴. Step 2: V = π[x⁵/5]20. Step 3: π(32/5) = 32π/5.
Chapter summary
- Integration reverses differentiation. dy/dx = xⁿ gives y = xⁿ⁺¹/(n + 1) + c, for n ≠ −1.
- Always add + c to an indefinite integral. A point on the curve gives the particular solution.
- Area under y = f(x) from a to b is ∫ba f(x) dx = F(b) − F(a). It comes from dA/dx = y, or from the limit of a sum of strips.
- An integral below the x axis is negative. Take the positive value for area, and split at any crossing.
- Area between two curves: ∫(top − bottom) dx between their intersections.
- Area between a curve and the y axis: ∫x dy, with x written in terms of y and y limits.
- Reverse chain rule: ∫(ax + b)ⁿ dx = (ax + b)ⁿ⁺¹/(a(n + 1)) + c, only for a linear inside.
- Improper integrals: replace the bad limit by a letter, integrate, then take the limit.
- Volumes: about the x axis V = ∫πy² dx; about the y axis V = ∫πx² dy.
| Key point | Formula |
|---|---|
| Power rule | ∫xⁿ dx = xⁿ⁺¹/(n + 1) + c |
| Definite integral | ∫ba xⁿ dx = [xⁿ⁺¹/(n + 1)]ba |
| Area under a curve | A = ∫ba y dx = ∫ba f(x) dx |
| Area between curves | B = ∫ba (f(x) − g(x)) dx |
| Area against the y axis | C = ∫qp x dy |
| Volume about the x axis | V = ∫ba πy² dx |
| Volume about the y axis | V = ∫qp πx² dy |
Which integral do I need?
| Common slip | Fix |
|---|---|
| Forgetting + c | Add it to every indefinite integral, then use a point to find it |
| Letting a region below the axis cancel one above | Split at the crossing and make each part positive |
| Using bottom − top | Test a point in the region to see which curve is on top |
| Squaring only part of y in πy² | Square the whole of y, and expand before integrating |
| Using x limits for a dy integral | The limits belong to the variable you integrate |
📄 Practice questions
The book's Exercises 6A to 6H, its activities and the Think about it questions are in the printable assignment for this chapter, along with a short Check yourself set.
Mini-quiz
Source: Pure Mathematics 1 (Hodder Education, Sophie Goldie), Chapter 6 (Integration). Explanations, the extra worked examples, the Try it answers, the tool, the simulations and the quiz are Guru Jazzy's own. This page is not made or endorsed by Hodder Education or Cambridge.