← AS & A Level Mathematics

AS & A Level Mathematics · Mechanics 1 · Chapter 5

Energy, work and power

  • Work measures energy transferred when a force acts over a distance: W = Fd or W = Fd cos θ.
  • Kinetic energy (KE = ½mv²) depends on speed; gravitational potential energy (GPE = mgh) depends on vertical height relative to a datum.
  • The work-energy principle equates net work done by all external forces to the total change in mechanical energy: W_driving = ΔKE + ΔGPE + W_resistances.
  • Power is the rate of doing work: P = W/t = Fv. At constant engine power, driving force decreases as speed increases, determining instantaneous acceleration and terminal velocity.

Learning objectives

  • Understand work done as force multiplied by distance in the direction of the force: W = Fd.
  • Calculate work done by a constant force acting at an angle θ to the direction of motion: W = Fd cos θ.
  • Calculate work done against friction (W = F_frictiond = μ R d) on horizontal surfaces and slopes.
  • Calculate work done against or by gravity (W = mgΔh) for vertical lifts and motion along inclined planes (h = d sin θ).

Book exercises: Exercises 5.1A, 5.1B, and Exam-style questions.

1. Work done by a constant force

  • Definition: Work is done when the point of application of a force undergoes a displacement.
  • Displacement in the line of the force:
    Work Done (W) = F × d
    • F is the magnitude of the constant force in newtons (N).
    • d is the distance moved in metres (m).
    • The SI unit of work is the joule (J), where 1 J = 1 N m = 1 kg m² s⁻².
  • Force acting at an angle θ to motion:
    • Only the component of the force parallel to displacement does work.
    • The component perpendicular to motion (F sin θ) does zero work because cos 90° = 0.
    • Formula: W = (F cos θ) × d = Fd cos θ.
Mass m Displacement d (m) Force F θ F cos θ (parallel to d) F sin θ (perpendicular) R (Reaction) W = mg Friction F_f
Force F resolved into F cos θ (parallel to motion, doing work) and F sin θ (perpendicular to motion, doing zero work).

2. Work done against friction and resistance

  • When an object moves across a rough surface, friction opposes the motion: F_friction = μ R.
  • Work done against friction:
    WD_friction = F_friction × d = μ R d
  • Sign convention:
    • Work done against friction is positive (+μ R d): energy transferred into thermal energy.
    • Work done by friction on the object is negative (-μ R d): it removes mechanical energy from the body.
  • When pulling at an angle θ above horizontal, resolving vertically gives R + F sin θ = mg ⇒ R = mg - F sin θ, reducing the normal reaction and the friction!

3. Work done against gravity and on inclined planes

  • Vertical lifting: Lifting mass m through height h requires overcoming weight mg.
    WD_gravity = mg × h = mgh
  • Motion up a slope of inclination θ over distance d:
    • Vertical height gained: h = d sin θ.
    • Work done against gravity: WD_gravity = mgh = mg(d sin θ) = (mg sin θ)d.
    • Notice this equals (component of weight down slope) × (distance along slope).
    • Normal reaction: R = mg cos θ. Frictional force: F = μ R = μ mg cos θ.
    • Total work done pushing up the slope at constant speed:
      Total WD = WD_gravity + WD_friction = mg d sin θ + μ mg d cos θ
θ h = d sin θ Distance d (along slope) Mass m P F = μR R = mg cos θ mg sin θ
Motion up an inclined plane: vertical rise is h = d sin θ, work against gravity is mgh = mgd sin θ, and normal reaction is R = mg cos θ.

4. Decision procedure for calculating work done

Step 1: Identify all forces and displacement vector d Sketch a clear force diagram showing driving forces, friction, weight, and normal reaction Step 2: Find the angle θ between each force and displacement Parallel: θ = 0° (W = Fd) · Perpendicular: θ = 90° (W = 0) · Opposing: θ = 180° (W = −Fd) Step 3: Resolve perpendicular to motion to determine normal reaction R Set ΣF_perp = 0 to evaluate R, then calculate friction force F_fric = μR Step 4: Compute work against friction (μRd) and gravity (mgh) Sum all individual work components or find net work done: W_net = F_net × d
Methodical flowchart for resolving forces and evaluating work done.

Worked examples: work done & inclined planes

Example 1 (Book Examples 1 & 2): Force at an angle

A crate is pushed 1.6 m across a horizontal table by a force of 8 N.

  • (a) Find the work done if the force is applied horizontally.
  • (b) Find the work done if the force acts at an angle of 30° above the horizontal.
  • (c) A frictional force of 3 N opposes the motion. Find the work done against friction.
  1. Identify horizontal force and distance: F = 8 N, d = 1.6 m. Calculate parallel work: W = Fd = 8 × 1.6 = 12.8 J.
  2. Calculate work when force is inclined at θ = 30°: W = Fdcos 30° = 8 × 1.6 × √3 / 2 = 12.8 × 0.8660 = 11.1 J (to 3 s.f.).
  3. Calculate work done against the opposing friction force: WD_friction = F_friction × d = 3 × 1.6 = 4.8 J.
  4. Check: The inclined force does less work than the horizontal force (11.1 < 12.8) because cos 30° < 1, as expected.

Example 2 (Book Example 4): Pulling at an angle on rough ground

A package of mass 23 kg is pulled 5 m at constant speed across a rough horizontal floor by a cord at an angle θ above horizontal, where sinθ = 7/25. Given that the work done against friction is 240 J, find the coefficient of friction μ between the package and the floor (take g = 10 m s⁻²).

  1. Use work done against friction to find the friction force: WD = F_friction × d ⇒ 240 = F_friction × 5 ⇒ F_friction = (240)/(5) = 48 N.
  2. Find cosθ using right-angled triangle trigonometry: since sinθ = 7/25, the adjacent side is √252 - 72 = √625 - 49 = √576 = 24, so cosθ = 24/25.
  3. Because the package moves at constant speed, horizontal forces balance: Tcosθ - F_friction = 0 ⇒ T(24/25) = 48 ⇒ T = (48 × 25)/(24) = 50 N.
  4. Resolve vertically to find normal reaction R: R + Tsinθ - mg = 0 ⇒ R = 23 × 10 - 50 × (7/25) = 230 - 14 = 216 N.
  5. Apply friction formula F = μ R: μ = F_friction / R = (48)/(216) = 2/9 approx 0.222.
  6. Check: Weight is 230 N, upward component of tension is 14 N, leaving R = 216 N. Friction is 2/9 × 216 = 48 N, perfectly matching Tcosθ = 50 × 24/25 = 48 N.

Example 3 (Book Example 5): Pushing up a rough inclined plane

A cart of mass 8 kg is pushed 15 m up a rough plane inclined at 14° to the horizontal. The coefficient of friction between the cart and the plane is μ = 1/16. Find the total work done against friction and gravity (take g = 10 m s⁻²).

  1. Resolve perpendicular to the plane to find normal reaction R: R = mgcos 14° = 8 × 10 × cos 14° = 80 × 0.9703 = 77.62 N.
  2. Calculate friction force: F = μ R = 1/16 × 77.62 = 4.851 N.
  3. Calculate work done against friction: WD_friction = F × d = 4.851 × 15 = 72.77 J.
  4. Calculate vertical height gained: h = dsin 14° = 15 × sin 14° = 15 × 0.2419 = 3.629 m.
  5. Calculate work done against gravity: WD_gravity = mgh = 8 × 10 × 3.629 = 290.3 J.
  6. Calculate total work done: Total WD = WD_friction + WD_gravity = 72.77 + 290.3 = 363.1 J = 363 J (to 3 s.f.).
  7. Check: Total force needed parallel to slope is mgsin 14° + F_friction = 80(0.2419) + 4.851 = 19.35 + 4.85 = 24.20 N. Total work = 24.20 × 15 = 363 J. Matches exactly.

✏️ Try it: work done & forces

  1. A force of 120 N pulls a sled 30 m across level ground at an angle of 25° above the horizontal. Calculate the work done by the force.
  2. A sack of flour of mass 25 kg is carried up a flight of stairs to a height of 4.2 m. Find the work done against gravity (take g = 10 m s⁻²).
  3. A box of mass 10 kg is pulled 6 m up a rough ramp inclined at 30° to the horizontal. The coefficient of friction is μ = 0.2. Find the total work done against gravity and friction (take g = 10 m s⁻²).
View solutions
  • 1. Step 1: Identify F = 120 N, d = 30 m, θ = 25°. Step 2: Apply W = Fd cos θ = 120 × 30 × cos 25°. Step 3: 3600 × 0.9063 = 3260 J (to 3 s.f.).
  • 2. Step 1: Identify m = 25 kg, h = 4.2 m, g = 10 m s⁻². Step 2: Apply WD = mgh = 25 × 10 × 4.2. Step 3: Calculate 250 × 4.2 = 1050 J (or 1.05 kJ).
  • 3. Step 1: Normal reaction R = mgcos 30° = 10 × 10 × √3 / 2 = 50√3 approx 86.60 N. Step 2: Friction F = μ R = 0.2 × 86.60 = 17.32 N. Step 3: Work against friction = 17.32 × 6 = 103.92 J. Step 4: Vertical height h = 6sin 30° = 3 m. Step 5: Work against gravity = mgh = 10 × 10 × 3 = 300 J. Step 6: Total work = 300 + 103.92 = 404 J (to 3 s.f.).

Next: 5.2 Kinetic & potential energy →

Kinetic energy and potential energy

  • Mechanical energy exists in two fundamental forms: kinetic energy (energy of motion) and gravitational potential energy (energy stored by vertical position).
  • Both quantities are scalars and are measured in joules (J).

1. Kinetic energy (KE) and its derivation

  • Formula: For a particle of mass m kg moving with speed v m s⁻¹:
    KE = ½mv²
  • Derivation from Newton's Second Law and SUVAT:
    • Consider a resultant constant force F accelerating mass m through distance s from initial velocity u to final velocity v.
    • From Newton's second law: F = ma.
    • From constant acceleration kinematics: v² = u² + 2as ⇒ as = ½(v² - u²).
    • Work done by the resultant force:
      W = Fs = (ma)s = m(as) = m × ½(v² - u²) = ½mv² - ½mu²
    • Work-Energy Theorem: The work done by the net resultant force on an object equals its change in kinetic energy:
      ΔKE = ½m(v² - u²) = W__net
  • Sign of ΔKE:
    • If v > u, ΔKE > 0: kinetic energy increases.
    • If v < u, ΔKE < 0: kinetic energy decreases.
    • Note caution: ½m(v² - u²) ≠ ½m(v - u)2! You must square the velocities first before subtracting.
Newton 2 F = ma + Constant accel. as = ½(v² − u²) Work Done W = Fs = mas ΔKE = ½m(v²−u²) Conclusion: Kinetic Energy gained = Work done by the accelerating resultant force
Theoretical bridge: combining dynamics (F = ma) with kinematics (v² = u² + 2as) yields the kinetic energy equation.

2. Gravitational potential energy (GPE) & datum reference levels

  • Definition: Gravitational potential energy is the energy an object possesses due to its height in a gravitational field.
  • Formula:
    GPE = mgh
    • m is mass (kg), g is acceleration of free fall (10 m s⁻² in Cambridge M1), and h is vertical height above a reference level (m).
  • Arbitrary datum reference level:
    • Potential energy has no absolute zero. It is always defined relative to an arbitrary horizontal reference plane called the datum level.
    • Points above the datum have h > 0 and positive potential energy (+mgh).
    • Points below the datum have h < 0 and negative potential energy (-mgh).
    • Physical outcomes depend strictly on the change in potential energy:
      ΔGPE = mg(h₂ - h₁) = mgΔh
      which is identical whichever datum plane is chosen!
Ground Shelf (2.4 m) Roof (10.0 m) Datum: Ground Roof: +10 mg Shelf: +2.4 mg Ground: 0 Datum: Shelf Roof: +7.6 mg Shelf: 0 Ground: −2.4 mg Δh = 7.6 m
Comparison of two datum choices: whether the ground or shelf is set as h=0, the loss in GPE falling from roof to shelf is identical: ΔGPE = mg × 7.6 J.

Worked examples: kinetic and potential energy

Example 1 (Book Example 6): Change in kinetic energy

A buggy of mass 25 kg has an initial speed of 28 m s⁻¹. It decelerates uniformly at 1.6 m s⁻² for 5 s. Find the change in kinetic energy of the buggy, stating whether it is an increase or a decrease.

  1. Identify initial parameters: m = 25 kg, u = 28 m s⁻¹, a = -1.6 m s⁻², t = 5 s.
  2. Calculate final velocity using v = u + at: v = 28 + (-1.6 × 5) = 28 - 8 = 20 m s−1.
  3. Calculate initial kinetic energy: KE_ (initial) = ½ × 25 × 282 = 12.5 × 784 = 9800 J.
  4. Calculate final kinetic energy: KE_ (final) = ½ × 25 × 202 = 12.5 × 400 = 5000 J.
  5. Calculate change in kinetic energy: ΔKE = KE_ (final) - KE_ (initial) = 5000 - 9800 = -4800 J (or -4.8 kJ).
  6. Conclusion: The negative sign indicates a decrease of 4800 J (or 4.8 kJ).

Example 2 (Book Example 7): Kinetic energy loss in a collision

Two particles A (mass 4 kg) and B (mass 2 kg) approach each other on a smooth horizontal surface at speeds of 2 m s⁻¹ and 3 m s⁻¹, respectively. After colliding, particle A rebounds with speed 1 m s⁻¹. Find the loss of kinetic energy during the collision.

  1. Set up coordinates: take the direction of A's initial motion as positive (+x). Initial velocities: u_A = +2 m s⁻¹, u_B = -3 m s⁻¹. Final velocity of A: v_A = -1 m s⁻¹.
  2. Apply conservation of linear momentum:
    m_A u_A + m_B u_B = m_A v_A + m_B v_B
    (4)(2) + (2)(-3) = (4)(-1) + (2)(v_B) ⇒ 8 - 6 = -4 + 2v_B ⇒ 2 = -4 + 2v_B ⇒ 2v_B = 6 ⇒ v_B = +3 m s−1
  3. Calculate initial kinetic energy:
    KE₁ = ½(4)(22) + ½(2)(-3)2 = 2(4) + 1(9) = 8 + 9 = 17 J
    (Note: book has m_B = 2 kg, 1/2 × 2 × 9 = 9 J; total = 17 J).
  4. Calculate final kinetic energy:
    KE₂ = ½(4)(-1)2 + ½(2)(32) = 2(1) + 1(9) = 2 + 9 = 11 J
  5. Calculate loss of kinetic energy:
    Loss in KE = KE₁ - KE₂ = 17 - 11 = 6 J
  6. Check: Kinetic energy before is 17 J and after is 11 J. Because the collision is inelastic, mechanical energy is converted into heat and sound, so a loss of 6 J is completely consistent.

Example 3 (Book Example 9): Vertical projectile — kinematics vs energy

A rocket of mass 3 kg is launched vertically upwards from the ground with an initial speed of 32 m s⁻¹. Assuming negligible air resistance and g = 10 m s⁻², find the maximum height reached using: (a) equations of uniform acceleration, (b) change in energy.

  1. Method (a) - SUVAT kinematics: At maximum height, v = 0. Using v² = u² + 2as with u = 32 m s⁻¹ and a = -g = -10 m s⁻²:
    0 = 322 + 2(-10)h ⇒ 20h = 1024 ⇒ h = (1024)/(20) = 51.2 m
  2. Method (b) - Conservation of energy: Initial state: ground level h = 0, PE = 0, KE = ½mu² = ½(3)(322) = 1.5 × 1024 = 1536 J.
  3. Final state at maximum height h: v = 0, KE = 0, PE = mgh = (3)(10)h = 30h.
  4. Equate initial kinetic energy to final potential energy: 30h = 1536 ⇒ h = (1536)/(30) = 51.2 m.
  5. Comparison: Both methods produce the exact same height 51.2 m, confirming that kinematics and energy conservation are completely equivalent descriptions of motion under gravity.

✏️ Try it: kinetic & potential energy

  1. A tennis ball of mass 60 g is served at 45 m s⁻¹. Calculate its kinetic energy.
  2. A diver of mass 70 kg stands on a 10 m diving platform. Calculate their gravitational potential energy relative to the water surface (take g = 10 m s⁻²).
  3. A car of mass 1100 kg accelerates from 12 m s⁻¹ to 20 m s⁻¹. Calculate the increase in kinetic energy in kilojoules ( kJ).
View solutions
  • 1. Step 1: Convert mass to kilograms: m = 60 g = 0.06 kg. Step 2: Compute KE = ½mv² = 0.5 × 0.06 × 452. Step 3: 0.03 × 2025 = 60.75 J (or 60.8 J).
  • 2. Step 1: Identify m = 70 kg, h = 10 m, g = 10 m s⁻². Step 2: Apply GPE = mgh = 70 × 10 × 10 = 7000 J (or 7 kJ).
  • 3. Step 1: Square initial and final speeds: u² = 122 = 144, v² = 202 = 400. Step 2: Apply ΔKE = ½m(v² - u²) = ½ × 1100 × (400 - 144). Step 3: 550 × 256 = 140,800 J = 140.8 kJ (or 141 kJ).

Next: 5.3 Conservation & work-energy →

Conservation of energy and the work-energy principle

  • Fundamental Law: Energy cannot be created or destroyed; it can only be transformed from one form to another.
  • Conservative system: When only conservative forces (such as gravity) act:
    Initial Mechanical Energy (E₁) = Final Mechanical Energy (E₂)
    KE₁ + GPE₁ = KE₂ + GPE₂ ⇒ ΔKE + ΔGPE = 0
  • General Work-Energy Principle (with driving forces and non-conservative resistances):
    Initial Energy + Work done by driving forces = Final Energy + Work done against resistances
    (KE₁ + GPE₁) + W_driving = (KE₂ + GPE₂) + W_resistances
    ΔKE + ΔGPE + W_resistances - W_driving = 0
  • Why work-energy is superior to SUVAT:
    • SUVAT formulas (v² = u² + 2as) require constant acceleration in a straight line.
    • The work-energy principle applies to any path, including curved slopes, circular loops, roller-coasters, and skate half-pipes, where acceleration changes continuously!
Datum Level: h = 0 Point X (h = 30 m) 30 m Point Y (Bottom) Point Z Rest (Apex) 100% GPE KE gain Resist. loss Resistive work: W = F_res × distance
Energy conservation on a curved slope: potential energy at X transforms into kinetic energy at Y, minus energy dissipated as heat by resistance.

🧪 Tool: Work, Energy & Conservation Engine

Explore an object of mass m sliding down an inclined plane with friction, or moving across horizontal rough terrain, solved step by step.

    Worked examples: conservation of energy

    Example 1 (Book Example 11): Freewheeling down a smooth slope

    A skateboard of mass 3.2 kg freewheels down a smooth footpath inclined at 12° to the horizontal. The initial speed of the skateboard is 2 m s⁻¹. By considering conservation of energy, find the distance d the skateboard has rolled when its speed reaches 8 m s⁻¹ (take g = 10 m s⁻²).

    1. Establish energy principle: because the footpath is smooth, no mechanical energy is lost to friction. Therefore:
      Loss in GPE = Gain in KE
    2. Calculate the vertical height lost in terms of distance d along the slope: h = dsin 12°.
    3. Formulate loss in GPE: ΔGPE = mgh = 3.2 × 10 × (dsin 12°) = 32dsin 12°.
    4. Calculate gain in kinetic energy:
      ΔKE = ½m(v² - u²) = ½ × 3.2 × (82 - 22) = 1.6 × (64 - 4) = 1.6 × 60 = 96 J
    5. Equate energy expressions and solve for d:
      32dsin 12° = 96 ⇒ d = (96)/(32sin 12°) = (3)/(sin 12°) = (3)/(0.2079) = 14.4 m
    6. Check: Acceleration along smooth slope is a = gsin 12° = 10 × 0.2079 = 2.079 m s⁻². Using v² = u² + 2as ⇒ 64 = 4 + 2(2.079)d ⇒ 60 = 4.158d ⇒ d = 14.43 m. Matches exactly!

    Example 2 (Book Example 12): Motion across mixed slopes and horizontal

    Starting from rest, a skateboarder of mass 75.4 kg freewheels 15 m down a concrete slope inclined at α, where sinα = 20/29. At the bottom, she travels 21 m along horizontal ground, then climbs a second slope inclined at β, where sinβ = 5/13, before coming to rest. She experiences a constant resistive force of 14 N throughout. Find the distance d she skates up the second slope (take g = 10 m s⁻²).

    1. Establish the reference datum at the horizontal ground (h = 0). Initial height on first slope: h₁ = 15sinα = 15 × 20/29 = (300)/(29) m. Initial potential energy:
      PE₁ = mgh₁ = 75.4 × 10 × (300)/(29) = 754 × (300)/(29) = 7800 J
      (since 754 / 29 = 26, and 26 × 300 = 7800).
    2. Final height on second slope: h₂ = dsinβ = 5/13d. Final potential energy:
      PE₂ = mgh₂ = 75.4 × 10 × (5/13d) = 754 × 5/13d = 58 × 5d = 290d J
      (since 754 / 13 = 58).
    3. Since she starts from rest (u = 0) and finishes at rest (v = 0), the total change in kinetic energy is zero: ΔKE = 0.
    4. Total distance travelled: s__total = 15 + 21 + d = 36 + d. Work done against constant resistance (14 N):
      WD__resistance = 14(36 + d) = 504 + 14d
    5. Apply conservation of energy: Initial Energy = Final Energy + Work against resistance:
      7800 = 290d + 504 + 14d ⇒ 7800 - 504 = 304d ⇒ 7296 = 304d
      d = (7296)/(304) = 24 m
    6. Check: Total resistance work is 14 × (36 + 24) = 14 × 60 = 840 J. Final potential energy is 290 × 24 = 6960 J. Total energy accounted for: 6960 + 840 = 7800 J, exactly matching the initial 7800 J!

    ✏️ Try it: conservation of energy

    1. A ball of mass 0.5 kg is dropped from rest from a height of 18 m. Using energy, find its speed when it has fallen 10 m (take g = 10 m s⁻²).
    2. A child on a sledge (total mass 40 kg) slides from rest 25 m down a rough hill of vertical height 8 m. If the work done against friction is 700 J, find the speed at the bottom.
    3. A particle is projected up a rough plane inclined at 30° to the horizontal with speed 12 m s⁻¹. A constant resistance of 4 N acts. If the particle has mass 2 kg, find the distance it travels before coming to rest.
    View solutions
    • 1. Step 1: Loss in GPE after falling 10 m is mgΔh = 0.5 × 10 × 10 = 50 J. Step 2: Equate to gain in KE: ½mv² = 50 ⇒ ½(0.5)v² = 50 ⇒ 0.25v² = 50 ⇒ v² = 200. Step 3: v = √200 = 14.1 m s−1 (to 3 s.f.).
    • 2. Step 1: Initial GPE = mgh = 40 × 10 × 8 = 3200 J. Step 2: Energy equation: Initial GPE = Final KE + Work against friction ⇒ 3200 = KE_ (final) + 700. Step 3: KE_ (final) = 2500 J. Step 4: ½(40)v² = 2500 ⇒ 20v² = 2500 ⇒ v² = 125. Step 5: v = √125 = 11.2 m s−1 (to 3 s.f.).
    • 3. Step 1: Initial KE = ½(2)(122) = 144 J. Final KE = 0. Step 2: Gain in GPE for distance d: mgh = 2 × 10 × (dsin 30°) = 20 × 0.5d = 10d. Step 3: Work against resistance: 4 × d = 4d. Step 4: Work-energy balance: 144 = 10d + 4d = 14d ⇒ d = (144)/(14) = 10.3 m (to 3 s.f.).

    Next: 5.4 Power & acceleration →

    Power and acceleration

    • Definition: Power is the rate at which work is done, or the rate of energy transfer with respect to time.
    • Average Power:
      Average Power (P) = (Work Done)/(Time taken) = W/t
      The SI unit of power is the watt (W), where 1 W = 1 J s⁻¹. A larger practical unit is the kilowatt (1 kW = 1000 W).
    • Instantaneous Power of a vehicle:
      • When a driving force F acts on an object moving with instantaneous velocity v:
        P = W/t = (F × d)/t = F (d/t) = Fv
      • Rearranging gives the driving force (tractive effort) exerted by the engine:
        F__drive = P/v
      • Key dynamic insight: If the engine works at a constant power P, as velocity v increases, the driving force F decreases!
    θ Mass M Speed v m/s F = P/v R (Resist.) mg sin θ N = mg cos θ accel. a
    Force balance on a powered vehicle climbing a slope: driving force F = P/v opposes resistance R and component of weight mg sin θ.

    1. Equation of motion and instantaneous acceleration

    • Applying Newton's second law in the direction of motion:
      Resultant force = ma ⇒ F__drive - Total opposing forces = ma
    • Horizontal road:
      P/v - R = ma ⇒ a = (1)/(m)(P/v - R)
    • Climbing a slope of inclination θ (uphill):
      P/v - R - mg sin θ = ma
    • Descending a slope of inclination θ (downhill):
      P/v - R + mg sin θ = ma
    • Because driving force P/v decreases as speed builds up, acceleration is not constant. SUVAT equations cannot be used over extended time periods for constant-power vehicles!

    2. Maximum (terminal) velocity

    • As speed increases, P/v drops until driving force exactly balances all resistive forces.
    • At this terminal state, the resultant force is zero, meaning acceleration is zero (a = 0):
      At maximum velocity v_max: a = 0
      • Horizontal road: P/v_max = R ⇒ v_max = P/R.
      • Ascending slope: P/v_max = R + mg sin θ ⇒ v_max = (P)/(R + mg sin θ).
      • Descending slope: P/v_max = R - mg sin θ ⇒ v_max = (P)/(R - mg sin θ).
    Speed v (m/s) Force (N) Total Resistance R Driving Force F = P/v v_max (a = 0) F > R: Accelerating (a > 0) F < R: Decelerating (a < 0)
    Driving force F = P/v decreases with velocity. At v_max, driving force equals resistance and acceleration reaches zero.

    🎛️ Simulation: Powered Vehicle Slope & Terminal Speed Runner

    • Adjust engine power, vehicle mass, road gradient, resistance, and current speed.
    • Watch the live force diagram, real-time acceleration, and maximum terminal velocity calculate live.
    Live dynamic diagram: driving force (cyan/blue), resistance (dashed), gravity component down slope (grey).

      Worked examples: power and acceleration

      Example 1 (Book Example 13): Cart on rough horizontal floor

      A girl and cart have a combined mass of 80 kg moving along a rough horizontal floor with coefficient of friction μ = 2/5. The engine works at a constant rate of 2.4 kW. Find: (a) the acceleration when moving at 5 m s⁻¹, (b) the maximum velocity, (c) the work done when moving at maximum velocity for 8 s (take g = 10 m s⁻²).

      1. Identify parameters: m = 80 kg, P = 2400 W, μ = 0.4, v = 5 m s⁻¹.
      2. Resolve vertically to find normal reaction and friction:
        R = mg = 80 × 10 = 800 N
        F_friction = μ R = 2/5 × 800 = 320 N
      3. Calculate driving force at v = 5 m s⁻¹: D = P/v = (2400)/(5) = 480 N.
      4. Apply Newton's second law horizontally:
        D - F_friction = ma ⇒ 480 - 320 = 80a ⇒ 160 = 80a ⇒ a = (160)/(80) = 2 m s−2
      5. At maximum velocity v_max, acceleration is zero (a = 0), so driving force equals friction:
        P/v_max = F_friction ⇒ (2400)/(v_max) = 320 ⇒ v_max = (2400)/(320) = 7.5 m s−1
      6. Calculate work done by engine in 8 s at maximum velocity using W = Pt:
        W = Pt = 2400 × 8 = 19,200 J (or 19.2 kJ)
      7. Check: At v_max = 7.5 m s⁻¹, distance moved in 8 s is d = 7.5 × 8 = 60 m. Work done = F × d = 320 × 60 = 19,200 J. Matches perfectly!

      Example 2 (Book Example 14): Power developed climbing a slope

      A car of mass 1200 kg climbs a road inclined at an angle of 9° to the horizontal. The coefficient of friction between the car and the road is 0.06. Find the power developed by the engine when the car is moving at 15 m s⁻¹ with an acceleration of 0.3 m s⁻² (take g = 10 m s⁻²).

      1. Resolve perpendicular to the incline to find normal reaction:
        R = mgcos 9° = 1200 × 10 × cos 9° = 12,000 × 0.9877 = 11,852 N
      2. Calculate frictional force: F = μ R = 0.06 × 11,852 = 711.1 N.
      3. Calculate the component of gravity acting down the slope:
        W__slope = mgsin 9° = 12,000 × sin 9° = 12,000 × 0.1564 = 1877.2 N
      4. Apply Newton's second law along the slope:
        D - F - mgsin 9° = ma
        D - 711.1 - 1877.2 = 1200 × 0.3 = 360
        D = 360 + 711.1 + 1877.2 = 2948.3 N
      5. Calculate instantaneous engine power using P = Dv:
        P = 2948.3 × 15 = 44,224.5 W = 44.2 kW (to 3 s.f.)
      6. Check: If moving at steady speed (a = 0), power would be (711.1 + 1877.2) × 15 = 38.8 kW. The extra 5.4 kW provides the kinetic acceleration rate ma × v = 360 × 15 = 5400 W. Exact agreement.

      Example 3 (Exam-style Q17): Speed-dependent resistance

      A car of mass 1800 kg moves on a level road with engine power 60.2 kW. The resistive force is (28v + 20) N. When the car accelerates at 0.4 m s⁻² at speed V: (a) show that 7V2 + 185V = 15,050, (b) find V, (c) show that maximum velocity is about 11 m s⁻¹ faster than V.

      1. Set up equation of motion: driving force is D = (P)/(V) = (60,200)/(V). By Newton 2:
        (60,200)/(V) - (28V + 20) = 1800 × 0.4 = 720
      2. Rearrange the equation:
        (60,200)/(V) = 28V + 740 ⇒ 60,200 = 28V2 + 740V
      3. Divide entire equation by 4:
        7V2 + 185V = 15,050 [Shown]
      4. Solve quadratic equation 7V2 + 185V - 15,050 = 0:
        V = frac-185 ± √1852 - 4(7)(-15,050)2(7) = frac-185 ± √34,225 + 421,40014 = frac-185 ± √455,62514
        Since √455,625 = 675: V = (-185 + 675)/(14) = (490)/(14) = 35 m s−1.
      5. Find maximum velocity where acceleration is zero:
        (60,200)/(v_max) = 28v_max + 20 ⇒ 28v_max2 + 20v_max - 60,200 = 0 ⇒ 7v_max2 + 5v_max - 15,050 = 0
        v_max = frac-5 + √25 - 4(7)(-15,050)14 = frac-5 + √421,42514 = (-5 + 649.17)/(14) = 46.01 m s−1
      6. Compare speeds: v_max - V = 46.01 - 35 = 11.01 m s⁻¹ approx 11 m s−1, confirming the statement.

      ✏️ Try it: power & acceleration

      1. A van moves at a constant speed of 24 m s⁻¹ along a level motorway against a total resistance of 750 N. Calculate the power output of the engine in kilowatts (kW).
      2. A car of mass 1000 kg has an engine power of 40 kW. Find the acceleration of the car when moving at 20 m s⁻¹ against a resistance of 500 N.
      3. A motorcycle of mass 220 kg produces 18 kW of power. If the resistance to motion is constant at 360 N, find its maximum speed on a level track.
      View solutions
      • 1. Step 1: At steady speed, driving force equals resistance: F = 750 N. Step 2: Power P = Fv = 750 × 24 = 18,000 W. Step 3: Convert to kilowatts: (18,000)/(1000) = 18 kW.
      • 2. Step 1: Driving force F = P/v = (40,000)/(20) = 2000 N. Step 2: Net resultant force = F - R = 2000 - 500 = 1500 N. Step 3: Acceleration a = fracF__net m = (1500)/(1000) = 1.5 m s−2.
      • 3. Step 1: At maximum speed, acceleration is zero, so F = R = 360 N. Step 2: Apply v_max = P/R = (18,000)/(360). Step 3: Compute v_max = 50 m s−1 (or 180 km h−1).

      Next: Review & practice →

      Chapter 5 summary review

      • Work done: W = Fd when force is in direction of displacement; W = Fd cos θ when force is inclined at angle θ. Forces perpendicular to motion do zero work.
      • Work against friction: WD_friction = F_frictiond = μ R d. Resolving vertically changes R when pulling/pushing at an angle.
      • Gravitational potential energy: GPE = mgh relative to an arbitrary datum level. Only changes ΔGPE = mgΔh determine motion. Along a slope, h = d sin θ.
      • Kinetic energy: KE = ½mv². Derived from F = ma and v² = u² + 2as. ΔKE = ½m(v² - u²) equals the net work done.
      • Work-energy principle:
        ΔKE + ΔGPE + Work against resistances = Work done by driving forces
        Applies to curved paths and variable acceleration where SUVAT equations fail.
      • Power: Average power P = W/t. Instantaneous power P = Fv ⇒ F__drive = P/v.
      • Equation of motion for powered vehicles: P/v - R - mg sin θ = ma. Maximum speed occurs when a = 0 ⇒ P/v_max = R + mg sin θ.

      Key formulas reference

      Concept Standard Formula Key Conditions / Notes
      Work Done W = Fd cos θ θ is angle between force vector and displacement; 1 J = 1 N m.
      Work against Friction W__friction = μ R d R is normal reaction obtained by resolving perpendicular to surface.
      Gravitational Potential Energy GPE = mgh h is vertical height above datum (g = 10 m s⁻² in Cambridge M1).
      Kinetic Energy KE = ½mv² Scalar quantity; change is ΔKE = ½m(v² - u²).
      Work-Energy Principle E₁ + W__drive = E₂ + W__resistance Applies across both straight and curved trajectories.
      Instantaneous Power P = Fv F is tractive driving force in newtons; P in watts (W).
      Vehicle Acceleration P/v - R - mg sin θ = ma Applies to uphill motion; use + mg sin θ for downhill motion.
      Maximum Velocity v_max = P/R_total Acceleration a = 0; driving force equals total resistance.

      📄 Practice questions & printable assignment

      Download the complete chapter assignment containing all 91 exercises from the Collins Mechanics Coursebook, plus Check yourself questions and the Chapter quiz:

      Download Chapter 5 Assignment (PDF)

      Chapter quiz

      Test your conceptual understanding and calculation mastery across Energy, Work and Power:

      1. A force of 50 N pulls a box 12 m along a floor at 60° above the horizontal. What is the work done?
      2. A 25 kg crate is lifted vertically through 8 m at constant speed (g = 10 m s⁻²). Find work done against gravity.
      3. What is the kinetic energy of a 1200 kg car travelling at 20 m s⁻¹?
      4. A 4 kg particle accelerates from 5 m s⁻¹ to 11 m s⁻¹. What is the gain in kinetic energy?
      5. A 0.5 kg ball drops from rest through a vertical height of 20 m (g = 10 m s⁻²). Find its speed just before impact.
      6. A block slides down a slope losing 80 J of GPE. If 30 J of work is done against friction, find its gain in KE.
      7. A car engine delivers 45 kW of power at a constant speed of 25 m s⁻¹. What is the driving force produced?
      8. A car faces a constant resistance of 600 N on level ground. What is its maximum speed when working at 30 kW?
      9. A car of mass 800 kg has engine power 24 kW. When moving at 20 m s⁻¹ against resistance 400 N, find its acceleration.
      10. An electric hoist lifts a 150 kg load through 12 m in 6 s (g = 10 m s⁻²). What is the average power developed?
      11. A 1000 kg car climbs a slope (sin θ = 0.05) at steady 15 m s⁻¹ against resistance 300 N (g = 10). Find engine power.
      12. When a car freewheels down a rough hill from rest, which statement correctly expresses the work-energy relation?

      Based on Collins Cambridge International AS & A Level Mathematics: Mechanics Student’s Book by Tom Andrews and Michael Kent, Chapter 5 (Energy, work and power).