← AS & A Level Mathematics

AS & A Level Mathematics · Mechanics 1 · Chapter 1

Forces and equilibrium

  • Forces as vector quantities: every force has both magnitude (in newtons, N) and direction, represented by directed arrows.
  • Particle model: bodies are treated as point masses with dimensions ignored, so forces act through a single point without rotation.
  • Principle of equilibrium: when a particle is at rest or moving at constant velocity, the resultant force is zero (Σ F = 0).
  • Contact forces & friction: contact between surfaces splits into a normal reaction R perpendicular to the surface and friction F parallel to it.

🎯 Learning objectives

  • Identify all forces acting on a body in a given physical situation and draw clear free-body force diagrams.
  • Understand the vector nature of force and recognise when a system of forces is in equilibrium.
  • Distinguish between weight, normal contact reaction, tension, thrust (compression), and friction.
  • Apply Newton’s third law to identify action-reaction pairs between contacting surfaces.

Book exercises: Exercise 1.1A and Chapter Review 1.

1. What is a force?

  • Definition: a force is a push, pull, or interaction that changes or tends to change the state of motion of an object.
  • SI unit: measured in newtons (N).
  • Vector property: completely specified by three characteristics:
    • Magnitude: size of the force in N (always non-negative).
    • Direction: angle or bearing along which the force acts.
    • Point of application: point at which the force acts on the body.
  • Particle approximation: in Mechanics 1, objects are modelled as particles (point masses), meaning all forces act concurrently at a single point.
R (Reaction) W = mg (Weight) T (Tension) F (Friction)
Standard free-body diagram for a particle on a rough horizontal plane pulled by tension T.

2. The five fundamental forces in Mechanics

Force Symbol Direction of Action Physical Origin / Characteristic
Weight W Vertically downwards Gravitational pull of Earth: W = mg (taking g = 10 m s⁻² in Cambridge 9709).
Normal Reaction R Perpendicular to contact surface Electromagnetic repulsion preventing bodies from penetrating solid surfaces.
Tension T Pulls away from the body Tensile force transmitted along a light taut string, cord, or cable.
Thrust (Compression) C or T Pushes towards the body Compressive force exerted by an inflexible light rod holding or pushing a body.
Friction F Parallel to contact surface Contact force resisting sliding or impending motion between rough surfaces.
T (Tension pulls away) W (Weight) Light taut string: TENSION T (Thrust pushes into) W (Weight) Light stiff rod: THRUST
Comparison: Tension in a suspended string pulls away; thrust in a supporting rod pushes into the particle.

3. Newton’s third law & equilibrium

  • Newton’s third law: every action has an equal and opposite reaction.
    • When an object rests on a table, the object exerts a downward normal force on the table.
    • The table exerts an equal, upward normal reaction force R on the object.
  • Equilibrium condition: a particle is in equilibrium if and only if the resultant force acting upon it is zero:

    Resultant force Rnet = Σ F = 0

  • Zero acceleration: by Newton’s first and second laws (F = ma), when resultant force is zero, acceleration is zero (a = 0), so the particle is either at rest (static equilibrium) or travelling at constant velocity.
1. Non-Contact Forces (Gravity)weight W = mg acts vertically downwards through centre of mass2. Contact Reactions at Surfacesnormal contact reaction R acts perpendicular to surface of contact3. Surface Frictionfriction F acts parallel to contact surface opposing impending relative motion4. Connections (Strings / Rods)taut string exerts tension T away from body; compressed rod exerts thrust towards it5. Equilibrium Equation Formulationset vector sum Σ F = 0, or resolve components: Σ F_x = 0 and Σ F_y = 0
Systematic procedure for identifying and classifying all mechanical forces on a particle.

4. Worked examples

Worked Example 1: Block at rest on a horizontal surface (Book Example 1)

A vase of weight 25 N is at rest on a horizontal table. Find the force exerted on the vase by the table.

  1. Model as a particle: represent the vase as a single point with its entire mass concentrated at that point.
  2. Identify active forces:
    • Weight W = 25 N acting vertically downwards.
    • Normal reaction force R exerted by the table acting vertically upwards (perpendicular to the surface).
  3. Apply vertical equilibrium: because the vase remains at rest, there is no acceleration vertically:

    R(↑):   R − 25 = 0  ⟹  R = 25 N

  4. Conclude: the force exerted on the vase by the table is 25 N vertically upwards.

Worked Example 2: Box pushed at steady speed against friction

A heavy storage box is pushed along a rough horizontal warehouse floor at a constant speed by a horizontal thrust force of 45 N. The normal reaction exerted by the floor is 180 N. Find the weight of the box and the magnitude of the frictional force.

  1. Identify all four forces:
    • Weight W acting vertically downwards.
    • Normal reaction R = 180 N acting vertically upwards.
    • Horizontal pushing thrust P = 45 N acting forwards (to the right).
    • Frictional force F acting backwards (to the left) opposing motion.
  2. Resolve vertically: steady speed means acceleration a = 0, so forces are in equilibrium:

    R(↑):   R − W = 0  ⟹  W = R = 180 N

  3. Resolve horizontally:

    R(→):   P − F = 0  ⟹  F = P = 45 N

  4. Answer: the weight of the box is 180 N and the frictional force is 45 N.

✏️ Try it

Question 1: A toy engine of weight 15 N is pulled at a steady speed along a horizontal track by a string with tension 4 N. What are the magnitudes of the normal reaction and the friction force?

Solution & Answer

Step 1: Resolve vertically: R − W = 0 ⟹ R = 15 N.

Step 2: Resolve horizontally: T − F = 0 ⟹ F = 4 N.

Answer: Normal reaction R = 15 N, Friction F = 4 N.

Question 2: A crate is held stationary in mid-air by a crane cable. If the tension in the cable is 3200 N, what is the mass of the crate? (Take g = 10 m s⁻².)

Solution & Answer

Step 1: Vertical equilibrium: T − mg = 0 ⟹ mg = 3200 N.

Step 2: Solve for mass: m = 3200 ÷ 10 = 320 kg.

Answer: Mass = 320 kg.

Question 3: A horizontal rod pushes a stationary block of weight 80 N against a rough vertical wall. If the thrust in the rod is 50 N, what are the normal reaction from the wall and the frictional force preventing the block from sliding down?

Solution & Answer

Step 1: Resolve horizontally: Normal reaction R = Thrust = 50 N.

Step 2: Resolve vertically: Friction F acts upwards to balance weight: F − 80 = 0 ⟹ F = 80 N.

Answer: Reaction R = 50 N (perpendicular to wall), Friction F = 80 N (upwards).

🎯 Learning objectives

  • Resolve any coplanar force into two mutually perpendicular components using sine and cosine.
  • Formulate and solve simultaneous equations for systems in equilibrium by resolving horizontally and vertically.
  • Use exact trigonometric ratios from Pythagorean right-angled triangles instead of rounded decimals.
  • Apply the equilibrium conditions R(→) = 0 and R(↑) = 0 to particles suspended by strings or pulled at an angle.

Book exercises: Exercises 1.2A and 1.2B.

1. The mathematics of resolving

  • Resolving: replacing a single force F acting at an angle θ with two perpendicular forces that produce the exact same mechanical effect.
  • Trigonometric rule:
    • Adjacent component: along the axis forming angle θ with the force:

      Adjacent component = F cos θ

    • Opposite component: perpendicular to that axis:

      Opposite component = F sin θ

  • Complementary angle check: since cos(90° − θ) = sin θ, resolving towards the other axis naturally gives F cos(90° − θ) = F sin θ.
x y F (Force) F_x = F cos θ (adjacent) F_y = F sin θ (opposite) θ
Resolving an inclined force F into horizontal component F cos θ and vertical component F sin θ.
Step 1: Choose Two Mutually Perpendicular Axesstandard horizontal (Ox) and vertical (Oy) axesStep 2: Resolve Angled Forces into Componentscomponent adjacent to angle θ is F cos θ; opposite is F sin θStep 3: Sum Components Horizontally: R(→) = 0equate forces pointing right to forces pointing left: Σ F_right = Σ F_leftStep 4: Sum Components Vertically: R(↑) = 0equate upward forces to downward forces: Σ F_up = Σ F_downStep 5: Solve the Resulting Simultaneous Equationssolve for unknown magnitudes (e.g. tensions T₁, T₂) or angles
Standard algorithm for setting up equilibrium equations along orthogonal axes.

2. Exact trigonometric ratios from right triangles

  • Avoid premature rounding: when angles are given as sin⁻¹(a/b) or tan⁻¹(p/q), work with exact fractions.
  • Pythagorean triples:
    • 3, 4, 5: if tan θ = 3/4, opposite = 3, adjacent = 4, hypotenuse = 5 ⟹ sin θ = 3/5, cos θ = 4/5.
    • 5, 12, 13: if sin θ = 5/13, adjacent = √(13² − 5²) = 12 ⟹ cos θ = 12/13, tan θ = 5/12.
    • 8, 15, 17: if cos θ = 8/17, opposite = √(17² − 8²) = 15 ⟹ sin θ = 15/17, tan θ = 15/8.
    • 7, 24, 25: if sin θ = 7/25 ⟹ cos θ = 24/25.
θ Adjacent = 8 Opposite = 15 Hypotenuse = 17 Exact Ratios cos θ = 8/17 sin θ = 15/17 tan θ = 15/8
Using an 8-15-17 right-angled triangle to obtain exact rational trigonometric values.

3. Worked examples

Worked Example 3: Dragging a box with an angled rope (Book Example 2)

A box of books is dragged along a rough horizontal floor at a steady speed by a rope making an angle of 35° with the floor. The tension in the rope is T N, the normal reaction is R N, the weight of the box is W N, and the frictional force is F N. Formulate equilibrium equations in the horizontal and vertical directions.

  1. Resolve the tension force T:
    • Horizontal component: T cos 35° in the direction of motion (rightwards).
    • Vertical component: T sin 35° upwards.
  2. Resolve horizontally (R(→) = 0): steady speed means zero acceleration:

    T cos 35° − F = 0  ⟹  F = T cos 35°

  3. Resolve vertically (R(↑) = 0): upward forces equal downward forces:

    R + T sin 35° − W = 0  ⟹  R = W − T sin 35°

  4. Conclusion: the normal reaction is reduced by the upward pull of the rope: R < W.

Worked Example 4: Particle suspended by two strings (Book Example 5)

A peg bag of weight 20 N is suspended in equilibrium from two strings, one inclined at 11° to the horizontal and the other at 7° to the horizontal. Find the tension in each string correct to 3 significant figures.

  1. Set up horizontal equilibrium: let T₁ be the tension at 11° (pulling up-left) and T₂ be the tension at 7° (pulling up-right):

    R(→):   T₂ cos 7° − T₁ cos 11° = 0  ⟹  T₁ = T₂ ×

  2. Set up vertical equilibrium:

    R(↑):   T₁ sin 11° + T₂ sin 7° − 20 = 0

  3. Substitute T₁ into the vertical equation:

    T₂ × ( sin 11° + sin 7°) = 20

    T₂ × (cos 7° tan 11° + sin 7°) = 20

    cos 7° tan 11° + sin 7° = (0.99255 × 0.19438) + 0.12187 = 0.19293 + 0.12187 = 0.31480

    T₂ = 20 ÷ 0.31480 = 63.5 N

  4. Calculate T₁:

    T₁ = 63.53 × = 63.53 × = 64.2 N

  5. Answer: T₁ = 64.2 N and T₂ = 63.5 N.

✏️ Try it

Question 1: A force of 50 N acts at an angle of 60° above the positive x-axis. Find its horizontal and vertical components.

Solution & Answer

Step 1: Horizontal component: F_x = 50 cos 60° = 50 × 0.5 = 25 N.

Step 2: Vertical component: F_y = 50 sin 60° = 50 × (√3/2) = 25√3 ≈ 43.3 N.

Answer: Horizontal = 25 N, Vertical = 43.3 N (or 25√3 N).

Question 2: A block of weight 65 N is held in equilibrium by two strings making angles of 30° and 60° to the horizontal ceiling. Find the tension in each string.

Solution & Answer

Step 1: Horizontal balance: T₁ cos 30° = T₂ cos 60° ⟹ T₁ (√3/2) = T₂ (1/2) ⟹ T₂ = T₁ √3.

Step 2: Vertical balance: T₁ sin 30° + T₂ sin 60° = 65 ⟹ 0.5 T₁ + 1.5 T₁ = 65 ⟹ 2 T₁ = 65.

Step 3: Solve: T₁ = 32.5 N, T₂ = 32.5 √3 ≈ 56.3 N.

Answer: T₁ = 32.5 N, T₂ = 56.3 N.

Question 3: A particle is pulled across a floor by a cord inclined at angle θ where tan θ = 5/12 with tension 26 N. If the weight is 40 N, find the normal reaction R from the floor.

Solution & Answer

Step 1: In a 5-12-13 triangle, sin θ = 5/13.

Step 2: Vertical component of tension: T sin θ = 26 × (5/13) = 10 N.

Step 3: Resolve vertically: R + 10 − 40 = 0 ⟹ R = 30 N.

Answer: Normal reaction R = 30 N.

🎯 Learning objectives

  • Resolve forces parallel and perpendicular to an inclined plane inclined at angle θ to the horizontal.
  • Correctly resolve weight W into W sin θ down the slope and W cos θ perpendicular into the slope.
  • Resolve external horizontal or angled pushing and pulling forces along the slope coordinate axes.
  • Formulate equilibrium equations to determine unknown normal reactions, tensions, or pushing forces.

Book exercises: Exercise 1.2A, 1.2B and Chapter Review 1.

1. Why resolve along the inclined plane?

  • Coordinate alignment: normal reaction R is perpendicular to the plane and friction F is parallel to it.
    • Resolving horizontally and vertically would split both R and F into components, leading to messy simultaneous equations.
    • Resolving parallel (↗) and perpendicular (↖) to the slope keeps R and F each on a single axis!
  • Weight decomposition: the weight W = mg acts vertically downwards, which makes angle θ with the normal to the slope:

    Perpendicular into slope: W⊥ = W cos θ

    Parallel down the slope: W∥ = W sin θ

θ R (Reaction) F W cos θ W sin θ W = mg
Standard decomposition of weight W on an inclined plane: W sin θ down the slope, W cos θ perpendicular into the slope.
Step 1: Align Coordinate Axes with Slopechoose parallel to slope (↗) and perpendicular to slope (↖)Step 2: Resolve Weight W = mg into Componentsperpendicular component into slope = W cos θ; parallel down slope = W sin θStep 3: Resolve External Forces (e.g. Horizontal P)component parallel to slope = P cos θ; component into slope = P sin θStep 4: Resolve Perpendicularly: R(↖) = 0find normal reaction R: R − W cos θ ± P sin θ = 0 ⟹ R = W cos θ ∓ P sin θStep 5: Resolve Parallel to Slope: R(↗) = 0balance driving forces, gravity component W sin θ, and friction F
Methodical procedure for resolving forces parallel and perpendicular to an inclined plane.

2. Resolving external forces on a slope

  • Horizontal force X pushing into slope:
    • Makes angle θ with the slope surface.
    • Parallel up the slope: X cos θ.
    • Perpendicular into the slope: X sin θ (adds to weight pressing into the surface).
    • Perpendicular equilibrium: R = W cos θ + X sin θ.
  • Pulling force P at angle α to the slope:
    • Parallel up the slope: P cos α.
    • Perpendicular away from slope: P sin α (relieves normal reaction).
    • Perpendicular equilibrium: R + P sin α = W cos θ ⟹ R = W cos θ − P sin α.
X θ X cos θ (up slope) X sin θ (into slope)
Decomposing a horizontal force X: X cos θ acts up the slope, X sin θ acts perpendicular into the surface.

3. Worked examples

Worked Example 5: Horizontal force holding particle on slope (Book Example 4)

A toaster of weight W N is at rest on a rough slope inclined at angle θ to the horizontal. A horizontal force of X N acts on the toaster, and as a result the toaster is on the point of moving up the slope. Resolve parallel and perpendicular to the slope.

  1. Identify force directions:
    • Normal reaction R acts perpendicular to and away from the slope (↖).
    • Friction F acts down the slope (↙) to oppose the impending upward motion.
    • Weight W acts vertically downwards (↓).
    • Force X acts horizontally to the right (→).
  2. Resolve parallel to the slope (R(↗) = 0):

    X cos θ − W sin θ − F = 0  ⟹  X cos θ = W sin θ + F

  3. Resolve perpendicular to the slope (R(↖) = 0):

    R − X sin θ − W cos θ = 0  ⟹  R = W cos θ + X sin θ

  4. Check: both the weight and the horizontal force press the object against the slope, increasing the normal reaction R.

Worked Example 6: Chair on slope held by friction (Book Exercise 1.2B Q1)

A 50 N chair is at rest on a slope inclined at 28° to the horizontal. The chair is held in position by friction alone. Find the magnitude of: (a) the normal reaction force, (b) the friction force.

  1. Identify forces: weight W = 50 N downwards, normal reaction R perpendicular up-left, friction F parallel up the slope.
  2. Resolve perpendicular to slope:

    R(↖):   R − 50 cos 28° = 0  ⟹  R = 50 × 0.88295 = 44.1 N

  3. Resolve parallel to slope:

    R(↗):   F − 50 sin 28° = 0  ⟹  F = 50 × 0.46947 = 23.5 N

  4. Answer: (a) Reaction R = 44.1 N, (b) Friction F = 23.5 N.

✏️ Try it

Question 1: A mass of 8 kg rests on a smooth plane inclined at 30° to the horizontal, held by a light cable parallel to the plane. Find the tension in the cable and the normal reaction from the plane. (Take g = 10 m s⁻².)

Solution & Answer

Step 1: Weight W = mg = 8 × 10 = 80 N.

Step 2: Parallel balance: T = W sin 30° = 80 × 0.5 = 40 N.

Step 3: Perpendicular balance: R = W cos 30° = 80 × (√3/2) ≈ 69.3 N.

Answer: Tension T = 40 N, Normal reaction R = 69.3 N (or 40√3 N).

Question 2: A box of weight 100 N on a rough 20° slope is pushed by a horizontal force P. If the normal reaction is measured to be 110 N, find the value of P.

Solution & Answer

Step 1: Perpendicular equation: R = W cos 20° + P sin 20°.

Step 2: Substitute: 110 = 100 cos 20° + P sin 20° ⟹ 110 = 93.97 + 0.3420 P.

Step 3: Solve for P: P = (110 − 93.97) ÷ 0.3420 = 16.03 ÷ 0.3420 ≈ 46.9 N.

Answer: P = 46.9 N.

Question 3: A particle of weight W rests on a rough slope inclined at angle θ where cos θ = 40/41. Find the ratio of the normal reaction R to the parallel weight component W_parallel.

Solution & Answer

Step 1: In a 9-40-41 triangle, sin θ = 9/41.

Step 2: R = W cos θ = 40/41 W; W_parallel = W sin θ = 9/41 W.

Step 3: Ratio R / W_parallel = (40/41) ÷ (9/41) = 40/9.

Answer: R : W_parallel = 40 : 9.

🎯 Learning objectives

  • Construct a closed vector triangle for three coplanar forces holding a particle in equilibrium.
  • Apply the Sine Rule and Cosine Rule to a triangle of forces to calculate unknown magnitudes or angles.
  • State and apply Lami’s theorem for three concurrent coplanar forces in equilibrium.
  • Compare the efficiency of resolving components versus the triangle of forces and Lami’s theorem.

Book exercises: Section 1.2 Alternative methods, Exercise 1.2B.

1. The triangle of forces principle

  • Vector condition for equilibrium: if three coplanar forces P, Q, and R act on a particle in equilibrium:

    P + Q + R = 0

  • Tip-to-tail polygon: drawing the vectors in order tip-to-tail forms a closed triangle.
    • The side lengths of the triangle represent the force magnitudes.
    • The interior angles of the triangle are determined from the directions of the forces.
  • Trigonometric tools:
    • Sine Rule: = =
    • Cosine Rule: P² = Q² + R² − 2QR cos A
F₁ = Q F₂ = R F₃ = P α β γ
Closed triangle of forces: three forces in equilibrium form a closed vector path tip-to-tail.

2. Lami’s theorem

  • Theorem statement: if three coplanar, non-collinear forces act at a point in equilibrium, each force is directly proportional to the sine of the angle between the other two forces:

    = =

    where α is the angle between B and C, β is between A and C, and γ is between A and B.
  • Direct shortcut: eliminates the need to set up and solve simultaneous equations when the geometry of the force lines is easily determined.
A B C γ α β
Lami’s theorem configuration: concurrent forces A, B, C with opposite angles α, β, γ.
System of 3 Coplanar Concurrent Forces in Equilibriumforces P, Q, R act at a single point and hold particle in balanceMethod A: Orthogonal Resolution (Universal)resolve horizontally and vertically; solve simultaneous linear equationsMethod B: Triangle of Forces (Tip-to-Tail)draw closed vector triangle; use Sine Rule or Cosine Rule on force lengthsMethod C: Lami’s Theorem (Angle-Based)use when angles between lines of action are known: P/sin α = Q/sin β = R/sin γ
Comparison matrix for selecting between Resolving, Triangle of Forces, and Lami’s Theorem.

3. Worked examples

Worked Example 7: Peg bag by Triangle of Forces & Lami’s Theorem

A peg bag of weight 20 N is suspended from two strings making angles of 11° and 7° with the horizontal. Calculate the tensions T₁ and T₂ using: (a) Triangle of forces with the Sine Rule, (b) Lami’s theorem.

  1. Find angles for the vector triangle:
    • Total angle between the two strings = 11° + 7° = 18°.
    • Angle between vertical 20 N force and string 1 = 90° − 11° = 79°.
    • Angle between vertical 20 N force and string 2 = 90° − 7° = 83°.
    • Check sum of interior angles: 18° + 79° + 83° = 180°.
  2. Apply Sine Rule to triangle:

    = =

    T₂ = = = 63.5 N

    T₁ = = = 64.2 N

  3. Apply Lami’s theorem:
    • Angle between T₁ and 20 N: 90° + 11° = 101°.
    • Angle between T₂ and 20 N: 90° + 7° = 97°.
    • Angle between T₁ and T₂: 180° − (11° + 7°) = 162°.

    =  ⟹  T₁ = = 64.2 N

    =  ⟹  T₂ = = 63.5 N

  4. Conclusion: both geometric methods give the identical values T₁ = 64.2 N and T₂ = 63.5 N with far less algebraic manipulation.

✏️ Try it

Question 1: A body of weight 30 N is suspended by two ropes. One rope is horizontal and the other is inclined at 45° to the vertical. Use a right-angled force triangle to find the tension in each rope.

Solution & Answer

Step 1: The forces form a 45°-45°-90° right triangle where weight W = 30 N is one leg.

Step 2: Horizontal tension T_h = W tan 45° = 30 × 1 = 30 N.

Step 3: Inclined rope tension T = W / cos 45° = 30 / (1/√2) = 30√2 ≈ 42.4 N.

Answer: Horizontal rope = 30 N, Inclined rope = 42.4 N (30√2 N).

Question 2: Three coplanar forces of magnitudes 12 N, 16 N, and 20 N hold a particle in equilibrium. What is the angle between the 12 N and 16 N forces?

Solution & Answer

Step 1: Notice 12² + 16² = 144 + 256 = 400 = 20².

Step 2: The closed vector triangle is a right-angled triangle with hypotenuse 20 N.

Step 3: In the vector triangle, the angle between the tip of one and tail of another is 90°, so the angle between their lines of action acting outward from the particle is 180° − 90° = 90°.

Answer: 90° (the forces are perpendicular).

Question 3: Use Lami’s theorem to find force P if forces P, 24 N, and 20 N are in equilibrium, and the angle between the 24 N and 20 N forces is 150°, while the angle opposite 20 N is 120°.

Solution & Answer

Step 1: Angle opposite P is 150°.

Step 2: Lami's theorem: P / sin 150° = 20 / sin 120°.

Step 3: P = 20 × (sin 150° / sin 120°) = 20 × (0.5 / (√3/2)) = 20 / √3 ≈ 11.5 N.

Answer: P = 11.5 N (or 20√3 / 3 N).

🎯 Learning objectives

  • Add two or more coplanar forces to find the magnitude and direction of their resultant force.
  • Use the Cosine Rule and Sine Rule on vector addition triangles.
  • Use orthogonal components along Cartesian axes (Ox and Oy) to combine any number of forces systematically.
  • Express force directions as angles to reference axes or as three-figure bearings.

Book exercises: Exercise 1.3A and Chapter Review 1.

1. Vector addition & resultant force

  • Resultant force: the single vector sum R = F₁ + F₂ + ... + Fₙ that produces the identical translational effect as all the individual forces combined.
  • Two forces at an angle:
    • When forces P and Q have an angle θ between their directions, construct a parallelogram or tip-to-tail triangle.
    • The angle inside the addition triangle adjacent to P and Q is 180° − θ.
    • Magnitude by Cosine Rule:

      R² = P² + Q² − 2PQ cos(180° − θ) = P² + Q² + 2PQ cos θ

P = 12 N Q = 10 N Resultant R = 20.7 N 40° 140° X = 18.1°
Adding two forces (12 N and 10 N at 40°) using the tip-to-tail triangle law and Cosine Rule.
Step 1: Define Cartesian Reference Axespositive x-axis (Ox) and positive y-axis (Oy), or North / East bearingsStep 2: Calculate Resolved Componentssum horizontal components: R_x = Σ F_i cos θ_i; vertical: R_y = Σ F_i sin θ_iStep 3: Compute Resultant Magnitudeapply Pythagoras: R = √(R_x² + R_y²)Step 4: Determine Direction / Anglecalculate reference angle: α = tan⁻¹(|R_y / R_x|); adjust for quadrant or bearing
Algorithm for calculating the resultant of any number of coplanar forces via orthogonal resolution.

2. Resolving multiple forces along Cartesian axes

  • General method for 3+ forces:
    1. Step 1: Resolve each individual force into its x-component (F_xi = F_i cos θ_i) and y-component (F_yi = F_i sin θ_i).
    2. Step 2: Sum all x-components: R_x = Σ F_x.
    3. Step 3: Sum all y-components: R_y = Σ F_y.
    4. Step 4: Compute overall magnitude: R = √(R_x² + R_y²).
    5. Step 5: Compute direction angle with positive x-axis: tan α = |R_y / R_x|.
  • Three-figure bearings:
    • Measured clockwise from North (000° to 360°).
    • North = 000°, East = 090°, South = 180°, West = 270°.
O_x O_y F₁ F₂ F₃ R = (R_x, R_y)
Multiple coplanar forces resolved onto Cartesian axes to find resultant components R_x and R_y.

3. Worked examples

Worked Example 8: Resultant of two forces (Book Example 7)

A particle is acted upon by two forces, P and Q. Force P is 12 N acting along the positive x-axis O_x, and force Q is 10 N acting at 40° anticlockwise to O_x. Find the magnitude and direction of the resultant force, correct to 1 decimal place.

  1. Draw tip-to-tail triangle:
    • Base side has length 12.
    • Second side has length 10 at exterior angle 40°, so interior angle is 180° − 40° = 140°.
  2. Apply Cosine Rule:

    R² = 12² + 10² − 2(12)(10) cos 140°

    R² = 144 + 100 − 240(−0.76604) = 244 + 183.85 = 427.85

    R = √427.85 = 20.7 N

  3. Apply Sine Rule to find angle X with O_x:

    =  ⟹  sin X = = 0.31075

    X = sin⁻¹(0.31075) = 18.1°

  4. Alternative check by components:

    R_x = 12 + 10 cos 40° = 12 + 7.660 = 19.660 N

    R_y = 10 sin 40° = 6.428 N

    R = √(19.660² + 6.428²) = √(386.53 + 41.32) = √427.85 = 20.7 N

    tan X = 6.428 ÷ 19.660 = 0.32696  ⟹  X = 18.1°

  5. Answer: magnitude = 20.7 N, direction = 18.1° to O_x.

✏️ Try it

Question 1: Forces of 15 N and 8 N act at a point along the positive x and y axes, respectively. Find the magnitude of the resultant and the angle it makes with the x-axis.

Solution & Answer

Step 1: Magnitude R = √(15² + 8²) = √(225 + 64) = √289 = 17 N.

Step 2: Direction angle θ = tan⁻¹(8 / 15) ≈ 28.1°.

Answer: Magnitude = 17 N, Angle = 28.1° to positive x-axis.

Question 2: A particle experiences a force of 24 N East and 7 N South. What is the three-figure bearing of the resultant force?

Solution & Answer

Step 1: The vector lies in the South-East quadrant: East = +24, North = −7.

Step 2: Angle south of East: α = tan⁻¹(7 / 24) ≈ 16.3°.

Step 3: Three-figure bearing from North: 90° + 16.3° = 106.3°.

Answer: Bearing = 106° (or 106.3°).

Question 3: Two equal forces of magnitude 20 N act at an angle of 120° to each other. Find the magnitude of their resultant force.

Solution & Answer

Step 1: In the addition triangle, the angle between the sides is 180° − 120° = 60°.

Step 2: Since both sides are 20 N and the included angle is 60°, the triangle is equilateral!

Step 3: Therefore, the third side (the resultant) has length 20 N.

Answer: Resultant = 20 N.

🎯 Learning objectives

  • Understand the physical model of friction and the inequality F ≤ μR for rough surfaces.
  • Define limiting equilibrium as the state where maximum static friction is mobilized: F = μR.
  • Prove that for a particle in limiting equilibrium on a slope under gravity alone, μ = tan θ.
  • Determine the full range of applied forces for which a body remains in equilibrium on a rough plane.

Book exercises: Exercise 1.4A and Chapter Review 1.

1. The law of friction

  • Contact force components: contact between rough solid surfaces produces two forces:
    • Normal reaction R: perpendicular to surface, prevents interpenetration.
    • Frictional force F: parallel to surface, opposes relative slipping.
  • Frictional inequality:

    F ≤ μ R

    where μ is the dimensionless coefficient of friction (typically between 0 and 1, though can exceed 1 for very sticky materials).
  • Smooth contact: an idealized surface where μ = 0, so F = 0 (no frictional resistance).
  • Limiting equilibrium: the critical threshold where a body is on the very verge of slipping:

    Fmax = μ R

Applied Force P Friction F F = μR Static Region F = P (F ≤ μR) Kinetic Motion Particle slides (F = μR) Limiting Equilibrium (F = μR)
Friction response: in the static region F balances applied load P until reaching limiting friction F_max = μR.
Examine Surface Property & Applied Loadis surface smooth (μ = 0) or rough (μ > 0)?Smooth Surface: F = 0contact force is purely the normal reaction R; no frictional resistance existsRough Surface & Stationary: F ≤ μRfriction adjusts itself to exactly balance net parallel force: F = |F_net| ≤ μRLimiting Equilibrium: F = F_max = μRparticle is on the verge of slipping; maximum static friction is mobilizedImpending Motion Direction Checkslipping down ⟹ friction acts UP; slipping up ⟹ friction acts DOWN
Decision logic for identifying whether friction is static, limiting, or zero.

2. Proof: Limiting equilibrium on a slope under gravity

  • Setup: consider a particle of weight W resting on a rough slope inclined at angle θ to the horizontal, with no external forces applied:
    1. Resolve perpendicular to slope:

      R(↖):   R − W cos θ = 0  ⟹  R = W cos θ

    2. Resolve parallel to slope: since impending motion is down the slope, friction F acts UP the slope:

      R(↗):   F − W sin θ = 0  ⟹  F = W sin θ

    3. Apply limiting condition: at the verge of slipping, F = μR:

      W sin θ = μ (W cos θ)

    4. Divide by W cos θ:

      μ = = tan θ

  • Physical meaning: the angle of the slope at which slipping starts depends only on the friction coefficient μ, completely independent of the mass or weight of the object!
θ W R = W cos θ F = W sin θ Angle of Friction μ = tan θ Independent of mass!
Derivation of the limiting slope angle: μ = tan θ under gravity alone.

3. Range of values for equilibrium on a slope

  • Two limiting cases when external force P is applied:
    • Case 1 (Minimum force P_min): body is on the verge of slipping DOWN the slope.
      • Friction opposes downward slip: F acts UP the slope.
      • Parallel equation: P_min + μR = W sin θ ⟹ P_min = W sin θ − μR.
    • Case 2 (Maximum force P_max): body is on the verge of slipping UP the slope.
      • Friction opposes upward slip: F acts DOWN the slope.
      • Parallel equation: P_max − μR = W sin θ ⟹ P_max = W sin θ + μR.
  • Equilibrium interval: for any applied force P in the closed interval [P_min, P_max], the body remains completely stationary.

4. Interactive simulation: Particle on rough inclined plane

🕹️ Live Mechanical Simulation: Adjust angle θ, friction μ, and applied force P

5. Interactive tool: Forces & equilibrium solver

🛠️ Forces & Equilibrium Step-by-Step Solver

Select problem mode, enter known parameters, and inspect the complete numbered mechanical working.

6. Worked examples

Worked Example 9: Block pulled into limiting equilibrium (Book Example 8)

An 18 N block is pulled by a light, horizontal taut cord on a rough horizontal table. The block is on the point of slipping. The coefficient of friction between the block and the table is 0.3. Find the tension in the cord.

  1. Resolve vertically (R(↑) = 0):

    R − 18 = 0  ⟹  R = 18 N

  2. Calculate limiting friction: since the block is on the point of slipping:

    F = μ R = 0.3 × 18 = 5.4 N

  3. Resolve horizontally (R(→) = 0):

    T − F = 0  ⟹  T = F = 5.4 N

  4. Answer: the tension in the cord is 5.4 N.

Worked Example 10: Range of equilibrium forces on an incline (Book Example 10)

A force of magnitude P N is applied parallel to the line of greatest slope up a rough plane inclined at angle θ to the horizontal, where sin θ = 11/61. The particle has weight 60 N and the coefficient of friction is 0.12. Find the range of values of P for which the particle remains in equilibrium.

  1. Find exact trig ratios: in an 11-60-61 right triangle (11² + 60² = 121 + 3600 = 3721 = 61²):

    sin θ = ,   cos θ =

  2. Resolve perpendicular to slope:

    R = 60 cos θ = 60 × = ≈ 59.016 N

  3. Calculate limiting friction F_max:

    Fmax = μ R = 0.12 × = ≈ 7.082 N

  4. Calculate weight component down slope:

    W sin θ = 60 × = ≈ 10.820 N

  5. Determine P_min (verge of slipping down): friction acts UP slope:

    Pmin + Fmax = W sin θ  ⟹  Pmin = 10.820 − 7.082 = 3.74 N

  6. Determine P_max (verge of slipping up): friction acts DOWN slope:

    Pmax − Fmax = W sin θ  ⟹  Pmax = 10.820 + 7.082 = 17.9 N

  7. Answer: the range of values for equilibrium is 3.74 N ≤ P ≤ 17.9 N.

✏️ Try it

Question 1: A concrete block of weight 120 N is at rest on a rough horizontal driveway where μ = 0.45. What horizontal force is required to set the block in motion?

Solution & Answer

Step 1: Normal reaction R = W = 120 N.

Step 2: Limiting friction F_max = μR = 0.45 × 120 = 54 N.

Step 3: Motion begins when horizontal force P exceeds F_max.

Answer: A force greater than 54 N (limiting force = 54 N).

Question 2: A box is placed on a ramp. As the ramp inclination is gradually increased, the box just begins to slip when the angle reaches 22°. Find the coefficient of friction μ.

Solution & Answer

Step 1: Under gravity alone, limiting equilibrium occurs when μ = tan θ.

Step 2: μ = tan 22° ≈ 0.404.

Answer: μ = 0.404.

Question 3: A 40 N object sits on a 30° rough incline with μ = 0.2. What minimum force P directed up the slope prevents the object from sliding down?

Solution & Answer

Step 1: Normal reaction R = 40 cos 30° = 40 × (√3/2) = 20√3 ≈ 34.64 N.

Step 2: Limiting friction F_max = 0.2 × 34.64 = 6.93 N (directed up slope).

Step 3: Downward gravity component = 40 sin 30° = 20 N.

Step 4: Equilibrium: P + F_max = 20 ⟹ P = 20 − 6.93 = 13.07 N.

Answer: P = 13.1 N.

Chapter 1 review & summary

  • Force as a vector: characterized by magnitude and direction. Equilibrium of a particle requires Σ F = 0.
  • Orthogonal resolution: any force F at angle θ to an axis splits into F cos θ (adjacent) and F sin θ (opposite).
  • Inclined planes: resolve parallel and perpendicular to the slope:
    • Normal reaction: R = W cos θ (relieved or increased by external forces).
    • Gravity driving force down slope: W sin θ.
  • Triangle of forces & Lami’s theorem: for 3 coplanar concurrent forces in equilibrium:
    • Forces form a closed tip-to-tail triangle: apply Sine / Cosine rules.
    • Lami’s theorem: = = .
  • Friction law: F ≤ μR at all times; F = μR at limiting equilibrium or during slipping.
  • Angle of friction: for a particle on a slope under gravity alone at limiting equilibrium, μ = tan θ.

⚠️ Common pitfalls and exam tips

  • Confusing sine and cosine: always remember that the component hugging the angle is cosine, and the perpendicular component is sine.
  • Friction direction: friction ALWAYS opposes relative motion. If a force pushes a particle up a hill, friction acts down the hill! If the particle tends to slide down, friction acts up the hill.
  • Assuming R = mg: on an inclined plane or when forces pull at an angle, R is NOT equal to mg. Always resolve perpendicularly to find R first!
  • Using F = μR when not limiting: if a particle is safely stationary and not on the verge of slipping, F < μR. Never set F = μR unless limiting equilibrium is explicitly stated or motion is occurring.

📝 Practice questions & printable assignment

Download the complete chapter assignment worksheet containing all book exercises (1.1A, 1.2A, 1.2B, 1.3A, 1.4A) and the End-of-chapter examination review questions.

📄 Download Chapter Assignment PDF

Chapter quiz

1. A contact force between two rough surfaces is resolved into two perpendicular components. What are they called?
2. A force F acts at angle θ above the horizontal. What is its resolved component in the horizontal direction?
3. A particle is in equilibrium under coplanar forces. What must be true about the resolved components in any direction?
4. A block of weight W rests on a plane inclined at angle θ to horizontal. What is the weight component down the slope?
5. A block of mass m rests on a smooth plane inclined at angle θ. What is the normal reaction R from the plane? (g = 10)
6. What is the relationship between friction F, normal reaction R, and friction coefficient μ for any rough surface?
7. A particle on a rough slope inclined at θ to the horizontal is on the point of slipping down. What is μ?
8. What is the key physical distinction between tension in a light string and thrust in a light rod?
9. Two perpendicular forces of 5 N and 12 N act at a point. What is the magnitude of their resultant force?
10. Three coplanar forces hold a particle in equilibrium. When drawn tip-to-tail, what geometric shape do they form?
11. Under Lami's theorem for three forces P, Q, R in equilibrium, how are the magnitudes related to opposite angles?

Source: Cambridge International AS & A Level Mathematics: Mechanics Student’s Book (Collins, Tom Andrews and Michael Kent), Chapter 1 · Forces and equilibrium.